Alen BreatheSmart Classic User Manual - Page 8

Browse online or download pdf User Manual for Air Cleaner Alen BreatheSmart Classic. Alen BreatheSmart Classic 12 pages. Hepa air purifier

Print Page

4. Take the new filter out of

the plastic bag and insert it

into the air cleaner with the

pull strings facing outward.

5. Insert the top tabs of the

front cover first and then

the lower part of the cover

will snap into place.

WARNING! RISK OF ELECTRIC SHOCK - These servicing instructions are for use by

qualified personnel only. To reduce the risk of electric shock, do not perform any servicing

other than that contained in the operating instructions unless you are qualified to do so.

How To Clean The SmartSensor

The SmartSensor uses an infrared light to detect airborne particles. After prolonged periods

of use, dust can accumulate on the glass lens and affect the sensitivity of the sensor. If this

occurs, your unit will run on the highest speeds when set in Automatic mode and will not come

down to the lower speeds even after cleaning the air. To clean the sensor lens, first turn your

unit off. Wet the end of a cotton swab with water and wipe the lens with it. Dry the lens with the

other end of the cotton swab. For best performance, clean the SmartSensor lens each time you

replace your filter.

3. Remove the used filter

by pulling out on the pull

strings. Place the used

filter in a plastic bag to

prevent dust from

re-entering the air.