Alen Paralda User Manual - Page 5

Browse online or download pdf User Manual for Air Cleaner Alen Paralda. Alen Paralda 7 pages. Hepa air purifier
Also for Alen Paralda: User Manual (12 pages), User Manual (9 pages), User Manual (12 pages), User Manual (10 pages)

Print Page

1. Replacing the Filter

REPLACiNg THE fiLTER

The filters used in all of Alen air purifiers are HEPA filters and are not designed

to be washed, cleaned or otherwise reused. Please replace the HEPA filter

regularly to maintain optimal high performance.

It is recommended for optimal performance from the air purifier that it is

left on continually. Under this type of usage, filters will need to be replaced

every six months. Please visit AlenCorp.com to sign up for a filter subscription

program so that a filter automatically is shipped to you whenever you want

it – every four, six or eight months!

How To REPLACE THE fiLTER

Lift the filter cover.

Turn the plastic locking mechanism that holds the filter in place to unlock

the filter.

Lift straight up on the filter cartridge handle and remove completely.

Insert the new filter.

Lock the new filter in place.

Reset the filter replacement

indicator – when the cover is

open, using the tip of a pen,

press and hold the pen in the

Filter Reset button for three

seconds.

PRogRAMMiNg THE PARALdA

The Paralda can be programmed to run at certain fan speeds at three pre-

set times throughout the day. This is done in the program mode. When in

the Program Mode, one of the three settings directly below the clock will be

illuminated (1,2, or 3). When in Manual Mode, the settings are not illuminated

and the air purifier will operate continuously at the current fan speed. This is

your visual indication for which mode you are using. When first turned on the

air purifier will be in manual mode. To change back to Manual Mode from

Program Mode simply press the unit off and turn back on.

To PRogRAM yoUR PARALdA

Press and hold PGM key for two seconds to

enter the setup mode. The unit will beep

and the clock with then blink. The current

time will turn on.

Press +/- to change the time.

Press the PGM key to accept the current

time. The current time turns off and the

setting 1 icon turns on. The clock will start

blinking.

Press +/- to change the time for setting 1.

Press the PGM key to accept the time for setting 1.

Press the SPEED button to select the fan speed for setting 1. This is the

speed you want the fan to run for the first preset time of the day.

Press the PGM key to accept the fan speed for setting 1.

Press +/- to change the time for setting 2.

Press the PGM key to accept the time for setting 2.

10. Press the SPEED button to select the fan speed for setting 2. This is the

speed you want the fan to run for the second preset time of the day.

11. Press the PGM key to accept the fan speed for setting 2.