Drazice OKC 200 NTRR / BP Operating And Installation Manual - Page 20

Browse online or download pdf Operating And Installation Manual for Boiler Drazice OKC 200 NTRR / BP. Drazice OKC 200 NTRR / BP 20 pages. Stationary water heaters
Also for Drazice OKC 200 NTRR / BP: Operation And Installation Manual (17 pages), Operation And Installation Manual (12 pages), Operation And Installation Manual (19 pages), Operation And Installation Manual (20 pages), Operation And Installation Manual (20 pages), Operation And Installation Manual (18 pages), Operation And Installation Manual (18 pages), Operating And Installation Manual (13 pages)

Print Page

Before filling the heater with water for the first time, it is recommended to fasten the flange

connection nuts of the tank.

It is not allowed to handle the thermostat, aside from temperature resetting with a control button.

All electric installation handling, adjustment and replacement of the regulation elements shall only

be performed by an authorised service company.

The thermal fuse must not be turned off! In case of thermostat defect, the thermal fuse interrupts

electric power input to the heating element if the water temperature in the heater exceeds 90 °C.

As an exception, the thermal fuse may also switch off due to water overheating caused by

overheating the hot water heating system boiler.

We recommend you operate the heater with one type of energy.

Both the electric and water installation must follow and meet the requirements and

regulations relevant in the country of use!

4.2 DISPOSAL OF PACKAGING MATERIAL AND NON-

FUNCTIONING PRODUCT

A service fee for providing return and recovery of packaging material has

been paid for the packaging in which the product was delivered. The service

fee was paid pursuant to Act No 477/2001 Coll., as amended, at EKO-KOM

a.s. The client number of the company is F06020274. Take the water boiler

packages to a waste disposal place determined by the town. When the

operation terminates, disassemble and transport the discarded and

unserviceable heater to a waste recycling centre (collecting yard), or contact

the manufacturer.

The product is supplied with a safety valve, 2 – 4 fastening screws M 12x30, 2-4 washers φ 13, brackets, and

a thermometer. The above parts are packed and placed in the packaging in the top part of the heater.

It is in your own interest to check the completeness of the accessories.

30-3-2016

- 20 -