Alen C425 Owner's Manual - Page 9

Browse online or download pdf Owner's Manual for Air Conditioner Alen C425. Alen C425 14 pages. Alen c425: user guide

Print Page

WATER TANK DRAINAGE

A) During Cooling Mode:

Install the Flexible Exhaust Hose and the Adjustable Window Slider Kit .

When the water level inside the internal tank reaches a predetermined level, the unit stop operation

automatically. The fan motor will continue to operate.

Carefully remove the water tank from the cabinet and dispose of the water. Replace the water tank

back to its original position.

B) During Dehumidifying Mode:

Remove the drain plug from the back of the unit and connect the drain hose, then connect the

other end of the drain hose to the water tank as depicted in Fig.5. So the condensed water will flow

into the internal tank through the drain hose.

When the water tank is full, just pull it out and dispose of the water.

7 CONTINUOUS DRAINAGE

- This unit also has provisions for a continuous drain option.

During Cooling and dehumidifying modes, remove the drain plug from the back of the unit, then

install the drain hose , attach a section garden hose (not included) to the drain hose connector.

Place the open end of the hose directly over the drain area in your basement floor.

Please refer to Fig.6 & 6a.

Note: This drain method will reduce the cooling capacity, in order to maintain the best cooling effect,

you had better employ the water tank drainage.

Fig.6

Remove the drain plug

from the back.

Remove the drain

plug and install the

drain hose.

Remove the

drain plug

Fig.5

Fig.6a

Connect the

drain hose