Bosch MBA534B.0A User Manual And Installation Instructiions - Page 13
Browse online or download pdf User Manual And Installation Instructiions for Oven Bosch MBA534B.0A. Bosch MBA534B.0A 32 pages. Double oven
Also for Bosch MBA534B.0A: Instruction Manual (40 pages)
Print Page
Requirements
¡ A type of heating and a temperature or setting are
set for the main oven .
¡ A cooking time is set.
Press the
button repeatedly until
1.
in the display.
Press the
or
button.
2.
a The display shows the calculated end time.
3.
Use the
or
button to delay the end time.
a After a few seconds, the appliance applies the set-
ting and the display shows the set end time.
a Once the calculated start time has been reached,
the appliance starts heating up and the cooking
time starts counting down.
a Once the time has elapsed, an audible signal
sounds and the display shows the cooking time as
zero.
When the cooking time has elapsed:
4.
Press any button to end the signal prematurely.
‒
To set another cooking time, press the
‒
When your food is ready, switch off the appli-
‒
ance.
Changing the end time
In order to achieve a good cooking result, you can only
change the set end time before operation starts and
the cooking time starts counting down.
is highlighted on the display.
Requirement:
Use the
or
button to delay the end time.
▶
a The appliance applies the change after a few
seconds.
9 Childproof lock
Secure your appliance to prevent children from acci-
dentally switching on the main oven
settings.
Note: After a power cut, the childproof lock is deactiv-
ated.
10 Rapid heating
To save time, you can use rapid heat-up to shorten the
preheat time.
Only use rapid heat-up when a temperature of over
100 °C has been set.
After rapid heat-up, it is best to use the following types
of heating:
¡ 3D hot air
¡ Top/bottom heating
is highlighted
button.
or changing the
a Rapid heating starts after a few seconds.
a When the rapid heating process ends, an audible
Cancelling the end time
You can delete the set end at any time.
is highlighted on the display.
Requirement:
Reset the end time to the current time plus the set
▶
cooking time using the
a After a few seconds, the appliance applies the
change and starts heating up. The cooking time
counts down.
8.5 Setting the time on the clock
Once the appliance has been connected to the mains
or following a power failure, the time flashes on the dis-
play. The time starts at "12:00". Set the current time.
Requirement: The function selector must be set to the
"Off" position .
Use the
or
button to set the time.
1.
Press the
button.
2.
a The time that is set appears on the display.
Changing the time on the clock
You can change the time on the clock at any time.
Requirement: The function selector must be set to the
"Off" position .
Press and hold the button until the clock flashes
1.
on the display.
Use the
or
button to change the time.
2.
a The appliance applies the change after a few
seconds.
9.1 Activating and deactivating the
childproof lock
Requirement: The function selector must be set to the
"Off" position .
To activate the childproof lock, press and hold the
▶
button until
appears in the display.
To deactivate the childproof lock, press and hold
‒
the
button until
10.1 Setting rapid heating
To ensure an even cooking result, do not place the
food in the cooking compartment until rapid heating
has come to an end.
Use the function selector to select rapid heating
1.
Use the temperature selector to set the required
2.
temperature.
signal sounds and the heating indicator goes out.
Use the function selector to set a suitable type of
3.
heating.
Place the food in the cooking compartment.
4.
Childproof lock en
button.
goes out in the display.
.
13