Bosch Series 4 Instructions For Installation And Use Manual - Page 13

Browse online or download pdf Instructions For Installation And Use Manual for Oven Bosch Series 4. Bosch Series 4 16 pages. Free standing cooker
Also for Bosch Series 4: Instruction Manual (24 pages), Instruction Manual (44 pages), Instructions For Installation And Use Manual (16 pages), Instruction Manual (16 pages), Instruction Manual (24 pages), Instruction Manual (10 pages), Instruction Manual (12 pages), Instruction Manual (20 pages), Instruction Manual (32 pages), Installation Instructions Manual (12 pages), Manual (2 pages), Quick Reference Manual (2 pages), User Manual (16 pages), Instruction Manual (50 pages), Information For Use (24 pages), Instruction Manual (48 pages), Information For Use (32 pages), Information For Use (32 pages), User Manual (32 pages), Information For Use (32 pages), Instruction Manual (24 pages), Instructions For Use Manual (27 pages), User Manual And Installation Instructions (40 pages), Information For Use (32 pages), Instruction Manual (36 pages), User Manual (24 pages), Instructions For Use Manual (47 pages), User Manual And Installation Instructions (28 pages)

Print Page
Bosch Series 4 Instructions For Installation And Use Manual
Electrical connection
:
Warning – Risk of electric shock!
Components inside the appliance may have sharp
edges. These may damage the connecting cable. Do
not kink or pinch the connecting cable during

installation.

The required connection data can be found on the
rating plate inside the appliance; to do this, remove the
metal mesh grease filter.
Length of the cable: approx. 1.30 m
This appliance complies with the EC interference
suppression regulations.
:
Warning – Risk of electric shock!
It must always be possible to disconnect the appliance
from the electricity supply. The appliance must only be
connected to a protective contact socket that has been
correctly installed.
The mains plug of the mains power cable must be
easily accessible after installation of the appliance. If
this is not possible, an all-pole isolating switch must be
integrated into the permanent electrical installation
according to the conditions of overvoltage category III
and according to the installation regulations.
The permanent electrical installation must only be wired
by a professional electrician. We recommend installing
a residual-current circuit breaker (RCCB) in the
appliance's power supply circuit.
5Installation
F itting the upper support frame
I n s t a l l a t i o n
Before fitting, determine the total height of the
1.
support frame and mark the screw holes.
The height of the support frame can be
Note:
adjusted in 20 mm intervals.
On the ceiling, mark the centre point of the
2.
appliance.
Using the enclosed template, mark the positions for
3.
the screws on the ceiling.
Drill four 8 mm diameter holes to a depth of 80 mm
4.
for the fasteners and press in the wall plugs flush
with the ceiling.
Fasten the upper part of the support frame to the
5.
ceiling with 4 screws.
Ensure that the support frame is in the correct
Note:
position. The middle bracket defines the preferred
side and must be facing the hob control elements.
Installation
en
13