Bosch Series 4 User Manual - Page 7

Browse online or download pdf User Manual for Oven Bosch Series 4. Bosch Series 4 16 pages. Free standing cooker
Also for Bosch Series 4: Instruction Manual (24 pages), Instruction Manual (44 pages), Instructions For Installation And Use Manual (16 pages), Instructions For Installation And Use Manual (16 pages), Instruction Manual (16 pages), Instruction Manual (24 pages), Instruction Manual (10 pages), Instruction Manual (12 pages), Instruction Manual (20 pages), Instruction Manual (32 pages), Installation Instructions Manual (12 pages), Manual (2 pages), Quick Reference Manual (2 pages), Instruction Manual (50 pages), Information For Use (24 pages), Instruction Manual (48 pages), Information For Use (32 pages), Information For Use (32 pages), User Manual (32 pages), Information For Use (32 pages), Instruction Manual (24 pages), Instructions For Use Manual (27 pages), User Manual And Installation Instructions (40 pages), Information For Use (32 pages), Instruction Manual (36 pages), User Manual (24 pages), Instructions For Use Manual (47 pages), User Manual And Installation Instructions (28 pages)

Print Page
Bosch Series 4 User Manual
4.5 Residual heat indicator
The hob has a two-stage residual heat indicator for
each hotplate. Do not touch the hotplate while the re-
sidual heat indicator is lit up.
5  Basic operation
5.1 Switching the hob on or off
The main switch is used to switch the hob on and off.
If you switch the appliance back on again within
4 seconds after switching off, the hob will start up with
the previously stored settings.
5.2 Switching on the hob
Touch
​ ⁠ .
▶
a The indicator lamp above
a The ​ ⁠ displays light up.
a The hob is ready for use.
5.3 Switching off the hob
The hob will switch off automatically when all hotplates
have been switched off for a while (10-60 seconds).
Touch
​ ⁠ .
▶
a The indicator lamp above
a The displays go out.
a All hotplates are switched off.
a The residual heat indicator remains on until the hot-
plates have cooled down sufficiently.
5.4 Setting the hotplates
To set a hotplate, it has to be selected.
Select the required heat setting on the control panel.
Heat setting
1
Lowest setting
9
Highest setting
.
Every heat setting has an intermediate
setting, e.g. 4. .
5.5 Selecting heat settings
Requirement: The hob is switched on.
Select the hotplate with
1.
​ ⁠ lights up on the power level display.
a
​ ⁠ lights up.
​ ⁠ goes out.
​ ⁠ .
Display
Meaning
The hotplate is so hot that you can
keep small dishes warm or melt cook-
ing chocolate.
The hotplate is hot.
Within the next 10 seconds, touch
2.
The basic setting appears.
–
​ ⁠ Power level 9
–
​ ⁠ Power level 4
5.6 Changing heat settings
Select the hotplate with
1.
Touch
​ ⁠ or
​ ⁠ until the required heat setting ap-
2.
pears.
5.7 Switching off the hotplate
There are 2 ways to switch off the hotplate.
Touch
​ ⁠ twice.
1.
​ ⁠ appears on the heat setting display.
a
a After approx. 10 seconds the residual heat indicator
appears.
Select the hotplate and touch
2.
pears on the heat setting display.
a After approx. 10 seconds the residual heat indicator
appears.
Note: The hotplate last selected remains activated. You
can adjust the hotplate without selecting it again.
5.8 Recommended cooking settings
You can find an overview of different foods with appro-
priate power levels here.
The cooking time varies depending on the type, weight,
thickness and quality of the food. The ongoing power
level depends on the cookware used.
Cooking tips
¡ To bring food to the boil, use heat setting 9.
¡ Stir thick liquids occasionally.
¡ Food that needs to be seared quickly or that initially
loses a lot of liquid during frying should be fried in
small portions.
¡ Tips for saving energy when cooking. → Page 5
Basic operation en
​ ⁠ or
​ ⁠ .
​ ⁠ .
​ ⁠ or
​ ⁠ until ​ ⁠ ap-
7