Anchor Beacon Owner's Manual - Page 6

Browse online or download pdf Owner's Manual for Speakers Anchor Beacon. Anchor Beacon 7 pages. Anchor beacon line array battery-powered, portable line array sound system
Also for Anchor Beacon: Owner's Manual (4 pages), Owner's Manual (4 pages), Owner's Manual (10 pages), Quick Start Manual (2 pages), Quick Start Manual (2 pages), Quick Start Manual (2 pages)

Print Page

Beacon® Sound System Owners Manual

BATTERY REPLACEMENT

The batteries must be replaced every 2 – 3 years depending on

usage over time. Call Anchor Audio at 800.262.4671 to order

batteries.

To replace your batteries you will need a Phillips screwdriver and

follow these procedures:

1. Be sure the power switch is in the OFF position

2. Remove the screws in the lower cover panel of

the Beacon

3. Gently slide the cover panel with the battery tray out of

the case

4. Unclip each battery connection cable and remove the

batteries from the tray

5. Connect each new battery to the connection cable, attach

plate to the tray and slide the tray into the Beacon

6 Replace each screw in the cover panel

SYSTEM STORAGE & BATTERIES

Fully charge batteries before storage. For extended periods of

storage either leave system plugged into an AC outlet or charge

the system at least once each month for a minimum of 24 hours.

Waste electrical and electronic products must not be disposed

of with household waste. Please recycle where facilities exist.

Check with your Local Authority or Retailer for recycling advice.

For System Setup & Operation Videos Visit Our Website: www.anchoraudio.com

BUILT-IN BATTERY MAINTENANCE

To preserve battery life the built-in batteries MUST be FULLY

charged before the first use. Regardless of length of operation,

it is recommended that batteries be fully charged as soon as

possible after each use.

AC OPERATION & BATTERY CHARGING

Beacon Sound Systems include an automatic charging system

designed to properly charge and maintain the systems built-in

batteries. To charge batteries plug the system into an AC outlet

and operate as normal while built-in batteries are charging.

The CHARGE STATUS LED will light when charging. Bright red

indicates charge process has begun. Amber indicates the charge

process is almost complete, and green indicates full battery. It

takes approximately 7 hours to charge the completely drained

Beacon batteries.

BATTERY SERVICE TIME

Fully charged batteries will yield approximately 6 – 8 hours of

continuous music at medium volume level (2 – 4 hours at full

volume or longer for speech only) . However, service times vary

depending on control settings and use of accessories.

BATTERY COMPARTMENT

NOTE: System Can Be Used During Charging!

MADE IN USA

SIX YEAR WARRANTY