Anchor Beacon BEA-6000U2 Owner's Manual

Browse online or download pdf Owner's Manual for Speakers Anchor Beacon BEA-6000U2. Anchor Beacon BEA-6000U2 4 pages. Portable line array sound system
Also for Anchor Beacon BEA-6000U2: Specifications (2 pages), Owner's Manual (4 pages), Specifications (1 pages)

Print Page
Anchor Beacon BEA-6000U2 Owner's Manual
HAVING TROUBLE W/ YOUR SOUND SYSTEM?
CONDITION
POSSIBLE SOLUTION
No Sound (power LED off)
• turn POWER switch ON
• charge battery or plug in AC cord
Charge Indicator LED off
• leave plugged in for 48 hours to repair battery
No Sound (power LED on)
• check for output from source
• make sure all cables are completely plugged in
• turn up volume control of input used
• remove plug from speaker output if not using external speaker output
Shortened Battery Life
• charge battery fully; if battery life continues to deteriorate, contact
Distorted Sound
• lower system volume control
Excessive Hum or Noise
• use shielded cables
• use balanced microphone
HAVING TROUBLE W/ YOUR WIRELESS SYSTEM? (WIRELESS MODELS ONLY)
CONDITION
POSSIBLE SOLUTION
No Sound (RX Indicator: ON)
• set MUTE switch to on (handheld mic only)
• turn up WIRELESS volume control
• make sure mic is plugged into body pack transmitter
No Sound (RX Indicator: OFF)
• push mic power button
• turn Beacon POWER switch on
• make sure transmitter power switch is on
• set receiver and transmitter to same channel
• replace battery in transmitter
NEED MORE HELP? Beacon Sound System Setup & Operation Videos!
Visit Our Website: www.anchoraudio.com/beacon.php
ANCHOR AUDIO CUSTOMER SERVICE
888-444-6077
BEACON TECHNICAL SPECIFICATIONS
Rated Power Output
300 watts AC / 60 watts DC
Max SPL @ Rated Power 110 dB
Battery
12 Volt rechargeable, 9.0 AH
Frequency Response
60 Hz – 15 kHz ± 3dB
Line Output (post fader)
isolated, 600 ohm, 1/4" phone
AC Power Reqs.
100 – 240 VAC, 50/60 Hz, 300W max
Dimensions (HWD)
26.25 x 11 x 18"/66.7 x 28 x 45.7cm
Weight
45 pounds / 20 Kg
(Specifications subject to change without notice)
Anchor Audio, Inc.
Portable Sound Systems • Torrance, California
Anchor Audio customer service: (888) 444-6077
Inputs
Lo-Z Microphone
balanced, phantom powered, XLR
Hi-Z Microphone
unbalanced, 1/4" phone
Line
Lo-Z balanced, 1/4" phone/RCA
Sensitivity For Rated Output
Lo-Z Microphone
-52 dBV (2.5 mVrms)
Hi-Z Microphone
-43 dBV (7.5 mVrms)
Auxiliary (line)
-14 dBV (200 mVrms)
BEACON
PORTABLE LINE ARRAY SOUND SYSTEM
OWNER'S MANUAL
GETTING STARTED - WARRANTY INFORMATION .................................................................................................. 2
SETTING UP YOUR BEACON SOUND SYSTEM ........................................................................................................ 2
CONTROLLING FEEDBACK - BEACON TRAVEL DOLLY ........................................................................................... 3
SOUND SYSTEM ACCESSORIES ............................................................................................................................... 3
BEACON SOUND SYSTEM BASIC OPERATION - OPENING & CLOSING THE LINE ARRAY ................................... 4/5
USING THE EXTERNAL AUDIO INPUT JACK ........................................................................................................... 6
OPERATING THE BUILT-IN UHF WIRELESS RECEIVER ........................................................................................... 6
OPERATING THE WIRELESS MICROPHONE/TRANSMITTER ................................................................................... 7
HAVING TROUBLE W/ YOUR SOUND SYSTEM? ...................................................................................................... 8
BEACON TECHNICAL SPECIFICATIONS ................................................................................................................... 8
100-0149-000/4- 11/06
CONTENTS