Bosch 14,4 VE-2-LI Instruction Manual - Page 4

Browse online or download pdf Instruction Manual for Power Tool Bosch 14,4 VE-2-LI. Bosch 14,4 VE-2-LI 8 pages. Professional
Also for Bosch 14,4 VE-2-LI: Original Instructions Manual (26 pages), Original Instructions Manual (41 pages), Original Instructions Manual (25 pages)

Print Page

OBJ_BUCH-1237-001.book Page 13 Tuesday, July 27, 2010 4:18 PM

GSR 14,4 VE-2-LI/GSR 18 VE-2-LI/

GSB 14,4 VE-2-LI/GSB 18 VE-2-LI

Hold power tool by insulated gripping sur-

faces, when performing an operation where

the cutting accessory or fastener may con-

tact hidden wiring. Cutting accessory and

fasteners contacting a "live" wire may make

exposed metal parts of the power tool "live"

and could give the operator an electric

shock.

Use appropriate detectors to determine if

utility lines are hidden in the work area or

call the local utility company for assistance.

Contact with electric lines can lead to fire

and electric shock. Damaging a gas line can

lead to explosion. Penetrating a water line

causes property damage or may cause an

electric shock.

Switch off the power tool immediately

when the tool insert jams. Be prepared for

high reaction torque that can cause kick-

back. The tool insert jams when:

— the power tool is subject to overload or

— it becomes wedged in the workpiece.

Hold the machine with a firm grip. High re-

action torque can briefly occur while driving

in and loosening screws.

Secure the workpiece. A workpiece clamped

with clamping devices or in a vice is held

more secure than by hand.

Keep your workplace clean. Blends of mate-

rials are particularly dangerous. Dust from

light alloys can burn or explode.

Do not open the battery. Danger of short-

circuiting.

Protect the battery against heat, e. g.,

against continuous intense sunlight,

fire, water, and moisture. Danger of

explosion.

In case of damage and improper use of the

battery, vapours may be emitted. Provide

for fresh air and seek medical help in case

of complaints. The vapours can irritate the

respiratory system.

Bosch Power Tools

Use the battery only in conjunction with

your Bosch power tool. This measure alone

protects the battery against dangerous over-

load.

Use only original Bosch batteries with the

voltage listed on the nameplate of your

power tool. When using other batteries, e. g.

imitations, reconditioned batteries or other

brands, there is danger of injury as well as

property damage through exploding batter-

ies.

Additional Safety and Working

Instructions

Dusts from materials such as lead-contain-

ing coatings, some wood types, minerals

and metal can be harmful to one's health

and cause allergic reactions, lead to respi-

ratory infections and/or cancer. Materials

containing asbestos may only be worked by

specialists.

– Provide for good ventilation of the work-

ing place.

– It is recommended to wear a P2 filter-

class respirator.

Observe the relevant regulations in your

country for the materials to be worked.

Before any work on the machine (e. g.,

maintenance, tool change, etc.) as well as

during transport and storage, set the rota-

tional direction switch to the centre posi-

tion. Unintentional actuation of the On/Off

switch can lead to injuries.

The battery is supplied partially charged. To

ensure full battery capacity, completely

charge the battery in the battery charger

before using for the first time.

The battery is equipped with a NTC temper-

ature control which allows charging only

within a temperature range of between

0 °C and 45 °C. A long battery service life

is achieved in this manner.

Read the operating instructions of the bat-

tery charger.

2 609 140 752 | (27.7.10)

English | 13