Anchor Explorer Pro Owner's Manual - Page 2

Browse online or download pdf Owner's Manual for Speakers Anchor Explorer Pro. Anchor Explorer Pro 8 pages. Anchor audio portable sound system
Also for Anchor Explorer Pro: Owner's Manual (8 pages), Owner's Manual (4 pages), User Manual (13 pages)

Print Page

Explorer Pro Sound System Owners Manual

BASIC SYSTEM OPERATION

NOTE: Fully Charge Batteries Before First Use!

1. Set all Input Level Controls to minimum

& Tones Controls to flat or the middle

setting before turning your system on

2. Plug a wired microphone into the MIC

1 or MIC 2 jacks and/or plug an audio

source into the LINE-IN jack

3. Switch POWER to ON, the BATTERY LED

will light

4. Slowly increase the Level Control for the

input jacks used to the desired volume

5. Adjust BASS & TREBLE controls to

desired sound quality

IMPORTANT: Make all connections with shielded

cables to avoid hum, buzzing or interference.

SPEAKER STAND SETUP

1. Loosen the Lower Collar Knob

2. Separate the stand legs until the leg support Cross

Braces are parallel to the floor

3. Tighten the Lower Collar Knob

4. Loosen the Upper Collar Knob and extend the

center pole

5. Adjust height and retighten the Upper Collar Knob

6. Place your Anchor sound system on the stand

UPPER

COLLAR

KNOB

LOWER

COLLAR

KNOB

CROSS BRACES

RX INDICATOR LIGHTS FOR

WIRELESS RECEIVER 1

A solid red light on one of the

RX Indicator Lights indicates

that the sound system is getting

good reception with the wireless

A solid red light on both RX

Indicator Lights indicates that

the sound system is a optimum

reception with the wireless

RX INDICATOR LIGHTS FOR

WIRELESS RECEIVER 2

WIRELESS MICROPHONE 1

wireless microphone levels

WIRELESS MICROPHONE 2

SPEAKER STAND ADAPTER

The 1.5" diameter Speaker Stand

Adapter lets you mount the

Explorer on a speaker stand.

AC POWER CORD INLET

1. Slide Speaker Stand Adapter

into slot on Explorer PRO

bottom

2. Tighten screw to secure

adapter

3. Place unit on stand carefully

4. Tighten screw on Adapter

collar securing Explorer PRO

on stand

For System Setup & Operation Videos Visit Our Website: www.anchoraudio.com

BACK PANEL OF EXP-7500U2

LINE OUT - OUTPUT JACK

Balanced 1/4" – provides a combined

output of all active system inputs

Record your presentation or connect to

WIRELESS RECEIVERS 4

another powered sound system

(see page 6)

microphone

WIRELESS 1

WIRELESS 2

microphone

VOLUME

LEVEL CONTROL

Adjust knob to control

LEVEL CONTROL

POWER INLET

100-240 VAC, 47-63 Hz

(250 WATTS MAX)

WARNING: TO REDUCE THE RISK OF FIRE

OR ELECTRIC SHOCK, DO NOT EXPOSE

THIS EQUIPMENT TO RAIN OR MOISTURE.

POWER SWITCH

CHARGE INDICATOR LIGHT (AC/DC only)

LINE IN

VOLUME

LINE OUT

TREBLE

BASS

MIC 1

VOLUME

MIC 2

VOLUME

MUSIC

CHARGE STATUS

SPEECH

VOICE

OVER

BATTERY EMPTY

OFF

POWER

SPEAKER OUT

BATTERY LEVEL

INDICATOR LIGHT

(AC/DC only)

MADE IN USA

SIX YEAR WARRANTY

LINE IN - INPUT JACKS

The 1/8" (3.5 mm) jack input is used to hook

up an iPod, a portable CD/ MP3/ tape player,

laptop computer, or similar external

audio source

The 1/4" unbalanced input can be used for

other communication devices including a

mixer or daisy chaining together multiple

Explorer speakers

LINE IN LEVEL CONTROL

TONE CONTROLS - BASS/TREBLE

WIRED MIC LEVEL CONTROLS

MUSIC/ SPEECH BUTTON

In situations where you're speaking to

a larger crowd or in a noisy environ-

ment, just push the Music/Speech

button in and give your voice an added

boost

To return back to normal use, just push

the Music/Speech button again

VOICE OVER BUTTON

Push the "Voice Over" button in

to have the music automatically

lowered when you speak through a

connected microphone

Music will return to original level

when mic use/speaking stops

SPEAKER OUT -

OUTPUT JACK

Connect the system to a

Explorer PRO unpowered

companion speaker