Bosch 1462vs Operating And Safety Instructions Manual - Page 3
Browse online or download pdf Operating And Safety Instructions Manual for Power Tool Bosch 1462vs. Bosch 1462vs 25 pages. Drills & fastening tools & accessories
Also for Bosch 1462vs: Section Manual (32 pages)
Print Page
BM 3609929451 2/02
2/20/02
or against your body is unstable and may
lead to loss of control.
Do not force tool. Use the correct tool for
your application. The correct tool will do
the job better and safer at the rate for which
it is designed.Do not use tool if switch
does not turn it "ON" or "OFF". Any tool
that cannot be controlled with the switch is
dangerous and must be repaired.
Disconnect the plug from the power
source before making any adjustments,
changing accessories, or storing the tool.
Such preventive safety measures reduce the
risk of starting the tool accidentally.
Store idle tools out of reach of children
and other untrained persons. Tools are
dangerous in the hands of untrained users.
Maintain tools with care. Keep cutting
tools sharp and clean.
maintained tools, with sharp cutting edges
are less likely to bind and are easier to
control. Any alteration or modification is a
misuse and may result in a dangerous
condition.
Check for misalignment or binding of
moving parts, breakage of parts, and any
other condition that may affect the tools
Hold tool by insulated gripping surfaces
when performing an operation where the
tool may contact hidden wiring or its own
cord. Contact with a "live" wire will make
exposed metal parts of the tool "live" and
shock the operator. Do not tap, fasten or
break into existing walls or other blind areas
where electrical wiring may exist. If this
situation is unavoidable, disconnect all fuses
or circuit breakers feeding this worksite.
Always hold the tool with both hands. If
the bit jams two hands will give you
maximum control over torque reaction or
kickback.
Secure the material being tapped. Never
hold it in your hand or across legs.
Unstable support can cause the drill bit to
bind causing loss of control and injury.
Never leave the trigger locked "ON".
Before plugging the tool in, check that the
trigger lock is "OFF". Accidental start-ups
could cause injury.
10:36 AM
Page 3
operation. If damaged, have the tool
serviced before using. Many accidents are
caused by poorly maintained tools. Develop
a periodic maintenance schedule for your
tool.
Use
only
recommended by the manufacturer for
your model. Accessories that may be
suitable for one tool, may become
hazardous when used on another tool.
Tool service must be performed only by
qualified repair personnel. Service or
maintenance performed by unqualified
personnel could result in a risk of injury. For
example: internal wires may be misplaced or
pinched, safety guard return springs may be
improperly mounted.
Properly
When servicing a tool, use only identical
replacement parts. Follow instructions in
the Maintenance section of this manual.
Use of unauthorized parts or failure to follow
Maintenance Instructions may create a risk
of electric shock or injury. Certain cleaning
agents
such
tetrachloride, ammonia, etc. may damage
plastic parts.
Safety Rules for Tappers
Position the cord clear of tapper. Do not
wrap the cord around your arm or wrist.
If you lose control and have the cord
wrapped around your arm or wrist, it may
entrap you and cause injury.
If the tapper becomes bound in the
workpiece,
immediately, reverse the direction of
rotation and slowly squeeze the trigger to
back out the bit. Be ready for a strong
reaction torque. The tool body will tend to
twist in the opposite direction as the tapper
is rotating.
Do not use the switch "Lock-ON" feature
in situations where tap binding is likely.
(For example: just before the tap is ready to
break through the material, anytime when
using a "Hole Saw", auger bits, etc.) When
the tap binds, the tapper body will twist or
kickback in opposite direction and the
release of the trigger "Lock-ON" may be
difficult.
-3-
accessories
that
are
Service
as
gasoline,
carbon
release
the
trigger