Anchor LIBERTY PLATINUM Owner's Manual - Page 2
Browse online or download pdf Owner's Manual for Speakers Anchor LIBERTY PLATINUM. Anchor LIBERTY PLATINUM 11 pages. Liberty platinum sound system
Also for Anchor LIBERTY PLATINUM: Owner's Manual (8 pages), Owner's Manual (7 pages), Manual (2 pages), Owner's Manual (4 pages), Owner's Manual (11 pages)
Print Page
Liberty Platinum Sound System Owners Manual
BASIC SYSTEM OPERATION
NOTE: Fully Charge Batteries Before First Use!
1. Set all Input Levels to minimum & Tone Controls to flat
(middle) setting
2. Plug wired microphone into the MIC 1 or MIC 2 jacks
and/or any audio source into the LINE-IN jacks
3. Switch POWER to ON, Power ON LED will light
4. Slowly increase Level Controls for active Input Jacks
to desired volume
5. Adjust Tone Controls for desired sound quality
IMPORTANT: Make all connections with shielded cables to avoid
hum, buzzing or interference.
WIRELESS RECEIVERS
TONE CONTROLS – BASS/TREBLE
LINE IN LEVEL CONTROL
MICROPHONE LEVEL CONTROLS
LINE OUT – OUTPUT JACK
Record your presentation or connnect to
another powered sound system.
LINE IN – INPUT JACKS
The 1/8 (3.5mm) jack is used to hook
up a portable CD player, iPod, laptop
or other external audio source.
Dual RCA unbalanced inputs can
be used for daisy-chaining together
multiple Liberty speakers.
UNIVERSAL MIC – INPUT JACKS
Balanced XLR – low impedance, for balanced mic,
powers condenser-type mics.
Unbalanced 1/4" – high impedance, for unbalanced
mics, no phantom power.
For System Setup & Operation Videos Visit Our Website: www.anchoraudio.com
BACK PANEL OF LIB-8000CU2
(see page 5)
Balanced 1/4"
POWER SWITCH
MADE IN USA
SIX YEAR WARRANTY
BLUETOOTH RECEIVER
(see page 7)
CD/MP3 COMBO PLAYER
(see page 4)
CHARGE STATUS LEDS
Green - Charge complete
Amber - Charge nearly complete
Red - Charging has begun
Power On LED
Green - power on
Battery Empty LED
Red - charge battery immediately
USB DC OUT - 5V 500 mA
To charge/power external device
AC POWER CORD INLET
2