Dream Catcher ME3000 Analog Electronics Lab 6 Manual

Browse online or download pdf Manual for Amplifier Dream Catcher ME3000 Analog Electronics Lab 6. Dream Catcher ME3000 Analog Electronics Lab 6 19 pages. Rf class a tuned amplifiers

Print Page

______________________________________________________________________

ME3000 Analog Electronics

RF Class A Tuned Amplifiers

This courseware product contains scholarly and technical information and is protected by copyright

laws and international treaties. No part of this publication may be reproduced by any means, be it

transmitted, transcribed, photocopied, stored in a retrieval system, or translated into any language in

any form, without the prior written permission of Acehub Vista Sdn. Bhd.

The use of the courseware product and all other products developed and/or distributed by Acehub

Vista Sdn. Bhd. are subject to the applicable License Agreement.

For further information, see the Courseware Product License Agreement.

Objectives

To demonstrate the practical issues of designing an RF tuned amplifier

ii)

To demonstrate AC measurements on a Class A amplifier

Equipment Required

ME3000-M2 Analog Electronics Training Kit

ii)

Digital Multimeter, recommendation : Agilent 34405A or U2741A

iii)

50 MHz Oscilloscope or equivalent, recommendation : Agilent DSO1002A 60 MHz or

U2701A

iv)

10 MHz Function Generator or equivalent, recommendation : Agilent 33220A or U2761A

Dual Output (+/- 12V, 0.5A) DC Power Supply, recommendation : Agilent E3631A

Accessories Required

1 x 4-way power supply cable

ii)

1 x BNC(m)-to-grabber clips coaxial cable

iii)

6 x jumper cables terminated with grabber clips at both ends

iv)

1 x antistatic wrist strap

Caution:

An electrostatic discharge generated by a person or an object coming in contact with electrical

components may damage or destroy the training kit. To avoid the risk of electrostatic discharge,

please wear the antistatic wrist strap and observe the handling precautions and recommendations

contained in the EN100015-1 standard. Do not connect or disconnect the device while it is being

energized.

ME3000 Analog Electronics

Lab 6

http://dreamcatcher.asia/cw

Lab 6 - 1/19