Dream Catcher ME1110 Quick Start Manual - Page 8

Browse online or download pdf Quick Start Manual for Modulator Dream Catcher ME1110. Dream Catcher ME1110 16 pages. Digital modulation technique, out-of-box teaching solution for analog and digital modulations, digital/analog modulation kit

Print Page

Step 3: Displaying the Modulated IQ Signals in the 89601 VSA Software

 Connect the RF out signal to the

oscilloscope's channel 1 through the

BNC-to-SMA cable.

 Use an USB cable to connect a PC to

the oscilloscope.

Note: The 89601 VSA software should

be preinstalled in the PC.

Set the oscilloscope to interface with

the 89601 VSA software. (Via the USB

port)

Instructions

Keystrokes

Set the

Press [Utility], followed

Input/Output

by {I/O}. The Current

controller

I/O Configuration dialog

box is displayed.

Select the

Press {Control} and

USBinterface

turn the Entry Knob

in the 89600

to USB. Press

{Control} again to

VSA software

select or activate the

USB controller.

*{ }= sofkey, [ ] = hardkey



To verify the oscilloscope connection,

select All Programs > Agilent

Connection Expert.

ME1110 Digital Modulation Technique

[email protected]

http://dreamcatcher.asia/cw

Quick Start Guide - 8/16