Anchor AnchorMAN H-200S Owner's Manual - Page 3

Browse online or download pdf Owner's Manual for Intercom System Anchor AnchorMAN H-200S. Anchor AnchorMAN H-200S 6 pages. Wireless intercom system

Print Page

BELT PACK OPERATION

The ergonomically designed BP-900 AnchorMAN belt pack features an XLR headset jack, heavy duty antenna, headset

volume control, microphone sensitivity control, group selection, PTT (push to talk) and transmission indicator LED. The

belt pack is powered by 4 (included) "AA" NiMH rechargeable batteries.

GROUP SELECTOR

To create a belt pack group, each member must set

their Group Selector to the same letter – A, B, C or D.

Press the GRP Button to change groups. The LED will

light indicating the selected Group (A, B, C, D) .

Example: Film Crew

The director assigns photography to Group A, sound

to Group B and lighting to Group C. He can then be

a part of any group by simply pressing the Group

Selector Button to the desired group.

Due to the unique environmental conditions found at some locations (Example: Next to a radio station transmission

tower.) you may find that one of the four Group settings experiences disruptive interference. Simply discontinue use

of the effected Group and try the three remaining Groups to identify the clearest signal. For best results try the Group

farthest from the affected Group first (If Group A has interference try Group D) .

GROUP SELECTION FOR EU USERS

To change Groups set DIP switch 3 as follows:

DIP 3 = UP/Off

DIP 3 = DOWN/On

PUSH TO TALK MODE / ACTIVE MODE

Push to Talk Mode (PTT) – Default mode when the PWR button is pushed.

Press PTT button to speak to Group, release PTT button to listen.

Active Mode – Hands free voice activated operation (VOX) requires adjust-

ing the Microphone Sensitivity level. Upon power up, belt packs default to

low requiring PTT operation. Push the "+" button repeatedly to increase

mic sensitivity until transmission is activated by the sound of your voice.

EU USERS: EU regulations limit continuous transmission time to five minutes.

This will require you to release the PTT button for one second before

continuing for another five minute maximum time period.

TRANSMIT/RECEIVE INDICATOR LED

GROUP SELECTOR LED

GROUP

SELECTOR

BUTTON

PUSH TO TALK BUTTON

–

Groups A & B

–

Groups C & D

POWER BUTTON

MICROPHONE SENSITIVITY