Anchor BIG2-RU2EU Owner's Manual - Page 3

Browse online or download pdf Owner's Manual for Speaker System Anchor BIG2-RU2EU. Anchor BIG2-RU2EU 17 pages.

Print Page
BIGFOOT 2
BASIC SYSTEM OPERATION
1.
Unfold Bigfoot Line Array
2.
Securely attach the rubber latches
3.
Set all Input Levels to minimum & Tone Controls to flat (middle) setting
4.
Plug wired microphone into the MIC 1 or MIC 2 jacks and/or any audio source into the LINE-IN jacks
5.
Switch Power to ON - Power On LED will light
6.
Slowly increase Level Controls for active Input Jacks to desired volume
7.
Adjust Tone Controls for desired sound quality
NOTE: Make all connections with shielded cables to avoid hum, buzzing, and interference.
To pair your Bluetooth enabled device, see the instructions on page 4.
To pair or unpair your AnchorLink wireless microphone or belt pack, see the instructions on page 5.
To operate the Anchor AIR, see the instructions on page 7.
AIR WIRELESS COMPANION TRANSMITTER
Depending on your purchase, your unit may include an AIR Wireless
Receiver or Tansmitter, or nothing
UNIVERAL WIRED MIC INPUTS & VOLUME CONTROLS
• BALANCED XLP
• BALANCED 1/4"
UNIVERAL WIRED MIC INPUTS & VOLUME CONTROLS
Depending on your purchase, your unit may include one, two, or zero
wireless mic receivers
UNIVERAL WIRED MIC INPUTS & VOLUME CONTROLS
• UNBALANCED 1/4"
• STEREO 3.5 MM (1/8")
BALANCED 1/4" LINE OUT
BLUETOOTH
ACTIVE BATTERY GAUGE
POWER CORD INLET
TONE CONTROLS
POWER SWITCH
3