Commodity Axis ViaAqua EF-6000 UVC Instructions Manual - Page 5

Browse online or download pdf Instructions Manual for Water Filtration Systems Commodity Axis ViaAqua EF-6000 UVC. Commodity Axis ViaAqua EF-6000 UVC 8 pages. Pressure pond filter
Also for Commodity Axis ViaAqua EF-6000 UVC: Manual (16 pages)

Print Page

A) SUBMERSED

1. Place pump in the desired location. If pump is placed in a pond, raise the pump off the

bottom of the pond by a minimum of 6 inches.

2. Use Teflon tape to connect the universal elbow or coupler to the output of the pump.

3. Place the o-ring onto the barbed pipe adapter. Then, use the Teflon tape to hand tighten the

barbed pipe adapter to the universal elbow or coupler. See diagram A.

4. Connect the flexible tubing to the barbed pipe adapter. Ensure water tightness with a hose

clamp.

5. Connect to filtration or water feature.

B) FOUNTAIN HEAD

1. Place pump in the desired location.

If pump is placed in a pond, raise the

pump off the bottom of the pond by a

minimum of 6 inches.

2. Use Teflon tape to connect the

universal elbow or coupler to the output

of the pump.

3. Install the fountain head properly. See

details in diagram B.

4. The diverter valve enables water flow

to be directed to either a water feature,

Terminator

UVC Sterilizer, or a

pressure pond filter.

FOUNTAIN HEAD: THREE TIER

INSTALLATION SETUP

SUBMERSED

FOUNTAIN HEAD: WATER BELL

-5-