Anchor UHF-EXT500-H Owner's Manual - Page 5

Browse online or download pdf Owner's Manual for Microphone system Anchor UHF-EXT500-H. Anchor UHF-EXT500-H 19 pages.

Print Page
BASIC SYSTEM OPERATION - WH-EXT500
7
1. Power Button: Press for 2 seconds to power the microphone on or off
2. Power LED: Indicates the power/low battery level status.
LED Indicator
Green
Flashing Green
Flashing Red
3. Talk Button: Push the button up to talk.
4. SYNC Button: Press to actuate the synchronization process with the receiver
5. LCD Display: Display channel number and battery power level.
6. Battery Compartment: Insert two AA dry or rechargeable batteries into the compartment and make sure that the polarity of
the batteries is correct.
7. Grille: Protects the microphone capsule and helps reduce breath sounds and wind noise.
BASIC SYSTEM OPERATION - WB-EXT500
8
4
2
3
1
5
5
Status
Ready
The synchronization process is actuated
Low battery power with less than 10 minutes of operation left
1. Power Button: Press for 2 seconds to power the belt pack on or off.
2. Mute Button: With the transmitter on, a slight press of button will toggle between mute
and unmute function.
3. Power LED: Indicates the power/low battery level status.
LED Indicator
Green
Flashing Green
Flashing Red
4. MUTE LED: Blue LED light on means unit is in mute status.
6
5. SYNC Button: Press to actuate the synchronization process with the receiver.
9
6. LCD Display: Display channel number and battery power level.
7. Battery Compartment: Insert two AA dry or rechargeable batteries into the
7
compartment and make sure that the polarity of batteries is correct.
8. Mini XLR Connector: Connect to the lapel microphone or headset microphone.
9. Gain Switch: The switch sets the audio input to -20dB, -10dB, or 0dB.
4
3
Status
Ready
The synchronization process is actuated
Low battery power with less than 10 minutes of operation left
2
6
1
4