Commodity Axis ViaAqua Multi-Duty Pond Pump DP-7000 Instructions Manual - Page 2

Browse online or download pdf Instructions Manual for Pond Pumps Commodity Axis ViaAqua Multi-Duty Pond Pump DP-7000. Commodity Axis ViaAqua Multi-Duty Pond Pump DP-7000 8 pages.

MULTI-DUTY POND PUMP
The ViaAqua ® Multi-Duty Pond Pump
performance garden water pump ideal for ponds,
large fountains, waterfalls, streams and external
filtration. It uses a large debris strainer that fully
encapsulates the pump to prevent water flow
blockage. The sophisticated design makes installation
and maintance very easy. The ViaAqua ® Multi-Duty
Pond Pump
includes complete fountain head kits
TM
and attachments to operate the pump submersibly.
WARNING
» This product may contain chemicals known to the State of California to cause cancer and/
or birth defects or other reproductive harm. Wash you hand after handling the product.
» It is your sole responsability to verify that the plug and receptacle are clean/free of
moisture and salt build up at all times. The receptacle must be free of water, salt, calcium,
and magnesium. Failure to do so may cause fire and/or loss of life.
» Do not plug into an extension cord or power strip.
» A drip loop must be used when plug into any electrical devices. A drip loop is part of the
cord hanging below the receptacle.
» The national code requires all aquarium equipment to be plugged into a G.F.C.I. (Ground
Fault Circuit Interrupter) electrical outlet. If you do not have a G.F.C.I., have an electrician
install one prior to operating any aquarium components.
1. Read and follow all instructions before using the ViaAqua
ensure proper use and application.
2. Use this product for its intended use only.
3. Do not operate the ViaAqua
all times or permanent damage maybe caused to the pump.
4. Prior to maintenance on any electrical aquarium appliance or aquarium, you must disconnect
all electrical aquarium devices.
5. Never operate the ViaAqua
an on/off timing device. Such devices will cause permanent damage to the pump and/or
demagnetize the impeller.
6. Routine maintenance is required to ensure the maximum performance and the longevity of
the ViaAqua
Multi-Duty Pond Pump
®
7. The use of a surge suppressor is strongly recommended.
8. Verify that the pump size is appropiate for your specific application without dramatically
is a high
TM
WARNING AND SAFEGUARD
Multi-Duty Pond Pump
®
Multi-Duty Pond Pump
®
. See maintenance guidelines.
TM
-2-
Multi-Duty Pond Pump
®
without being submersed in water at
TM
with an electronic wavemaker or
TM
to
TM