Formax FD 404A1 Operator's & Parts Manual - Page 8
Browse online or download pdf Operator's & Parts Manual for Printer Formax FD 404A1. Formax FD 404A1 12 pages. High-capacity air jogger
Print Page
Using the Timer
1. Set Timer switch to on (I).
2. Turn the Timer Adjustment Knob to the desired length of time you wish to jog. Choose from 0 to 60 seconds.
3a. Standard operation: Set the timer switch to the on position and set the three way switch to the on position, air
llow and vibrations begin when the is stepped on. Jogging and air flow will stop when the set time has passed.
3b. Foot Pedal operation: Set the timer switch to the on position and set the three way switch to FOOT, air flow
and vibrations begin when the foot switch is stepped on. Jogging and air flow will stop when the set time has
passed.
TROUBLESHOOTING
TROUBLE
Paper is not jogged
completely
Air flow is weak
No air is discharged
Paper tray will not vibrate
DAILY MAINTENANCE
Clean the air outlet vents in the paper tray to remove paper scraps or dust.
POSSIBLE CAUSE
Paper is a non-standard size
Paper has static electricity
Too much paper in paper tray
Air adjustment knob is set to
low volume
Paper or paper scrap is lodged
in air inlet or outlet
If air flow problem is not fixed following these suggestions, blower
maintenance may be required. Call for service.
Air adjustment knob is set to
OFF
Fuse is blown
If the fuse is blown again after replacement, the cause may be within the
machine. Call for service.
Jogger adjustment knob is set
to OFF
Fuse is blown
If the fuse is blown again after replacement, the cause may be within the
machine. Call for service.
REMEDY
Jog it while loosening it by hand.
Add some space between the sheets by
hand.
Reduce the volume of paper jogged at one
time.
Turn knob to the right to increase air flow.
Clear air inlet and/or outlet.
Turn knob to the right to increase air flow.
Replace Fuse
Turn knob to the right to increase vibrations
Replace Fuse
4