Electrolux ESF 2410 Instruction Book - Page 5

Browse online or download pdf Instruction Book for Dishwasher Electrolux ESF 2410. Electrolux ESF 2410 16 pages.

Print Page

The control panel

Programme selection/cancel button

is used to:

• select the programme

• deactivate/activate the audible signal

• cancel a dishwashing cycle

Audible signal

Audible signal have been introduced to help indicate

which operations the dishwasher is performing:

• end of washing programme

• malfunction of the machine

Deactivation/activation of the audible signal

The audible signal is activated when leaving the factory.

1. To deactivate the signal: With the dishwasher

switched off, press in the On/Off button. The

ended programme lamp flashes.

If one of the programme lamps is illuminated, this

wash programme is activated. The programme

must be deselected: press and hold the pro-

gramme selection/cancel button for approx. 3

seconds. The programme lamp goes out and the

indicator for the ended programme cycle flashes

indicating that the programme has been cancelled.

On/Off button

Delay start

button

- 5 -

Programme lamps

Programme selection/

Cancel button

Control lamps:

Shows that:

• Wash cycle in progress

• Drying in progress

• Programme cycle ended

The programme cycle ended lamp has also other functions

of visual signalling:

• when deactivating/activating the audible signal

• with malfunction of the machine

2. Press the programme selection/cancel button

and hold it pressed until indicator lamp 1 starts

to flash and lamp 2 lights up.

3. Directly after press the programme button again,

lamp 1 will change from flashing to continual illu-

mination and goes out after approx. 3 seconds.

Lamp 2 starts to flash and the indicator for the

ended programme cycle goes on. Press the button

once more and the lamp for the ended programme

cycle goes out. The audible signal is now off.

4. Press out the On/Off button to complete the setting.

To activate the function again, follow steps

above, until the lamp for the ended programme

cycle goes on again.

Control

lamps