Athentek Circo User Manual - Page 5

Browse online or download pdf User Manual for GPS Athentek Circo. Athentek Circo 8 pages. Wearable smart tracking device

Print Page

How do I turn Circo on and off?

 Press the power button until the light turns red.

Why does Circo not turn on?

 The battery might be low. Please plug in the micro USB cable to charge Circo.

 Please make sure Circo has a working SIM card (data and SMS enabled).

Where can I find the device's ID number?

 On the back of the Circo device there is a QR code, and the numbers below it are the

device's ID number.

 On the app, choose a device and go to "Profile". The numbers below the picture are the

device's ID number.

 The device ID also is printed on the back of the User Manual which comes with each Circo.

Why does the Circo app say the device is not available or pairing fails?

 If you enter an incorrect SIM card mobile phone number, please wait for 10 minutes to

retry.

 If you forgot to press the power button when Circo lit up, please re-enter the device ID and

add the device again.

 If your location has poor cellular reception, then Circo may not be able to pair up with the

Circo app.

How many Circos can I follow?

 There is no limit to how many Circo you can follow.

How many people can follow the same Circo?

 There can be up to 6 people following the same Circo at one time.

How come the light turns green right after I started charging?

 If you start charging Circo when it is off, then the light will first turn green (which means

Circo is turning on), and then turn orange (which means Circo is charging). When Circo is

fully charged, the light will turn green.

 If the light stays green after you've started charging, then it might be because the current

location has poor cellular reception. In this case, it may take longer to for the Circo device

to turn on.

 You can check on the Circo app to see the current battery status.

Questions