Electrolux ESF 6146 S-Visi Instruction Book - Page 10

Browse online or download pdf Instruction Book for Dishwasher Electrolux ESF 6146 S-Visi. Electrolux ESF 6146 S-Visi 18 pages.

Print Page

Filling with dishwasher salt

Only use salt specifically designed for use in

dishwashers.

All other types of salt not specifically designed for use in

a dishwasher, especially table salt, will damage the water

softener.

Only fill with salt just before starting one of the complete

washing programmes.

This will prevent any grains of salt or salty water, which

may have been spilt, remaining on the bottom of the

machine for any period of time, which may cause

corrosion.

To fill:

1. Open the door, remove the lower basket and unscrew the

cap of the salt container by turning it anticlockwise.

2. Pour 1 litre of water inside the container (this is necessary

only before filling with salt for the first time).

3. Using the funnel provided,

pour in the salt until the

container is full.

4. Replace the cap making

sure that there is no trace

of salt on the screw

thread or on the gasket.

5. Replace the cap tightly

turning it clockwise until it

stops with a click.

The salt container will require topping up periodically.

You are reminded of this by

the salt indicator light in the

inside of the salt container

which comes on when the salt

has finished.

The indicator light is visible

through the window in the

centre of the salt cap (red

colouring).

The salt indicator light can remain illuminated for 2-6

hours after the salt has been replenished, assuming the

dishwasher remains switched on. If you are using salts

that take longer to dissolve then this can take longer. The

function of the machine is not affected.

Do not worry if water overflows from the unit when filling with

salt, this is quite normal.

Rinse aid

Rinse aid is automatically added during the last rinse, ensuring

thorough rinsing, and spot and streak free drying.

The integrated dispenser of rinse aid and detergent is

positioned in the centre of the upper basket and holds about

120 ml of rinse aid, which is sufficient for 10-20 dishwashing

cycles, depending upon the selected washing programme.

The upper part of the integrated dispenser has both functions

as lid for the rinse aid container and dispenser for the

detergent.

Filling with rinse aid

1. Open the container by pressing the release button (A).

2. Add the rinse aid until the container is completely full. The

level can be controlled in the viewer (B).

Only use branded rinse aid for dishwashers. Never fill the

rinse aid dispenser with any other substances (e.g.

dishwasher cleaning agent, liquid detergent). This would

damage the appliance.

Ensure that the lid is closed after every refill.

Check periodically the level of rinse aid in the viewer B and top

up the rinse aid if necessary, this before loading the detergent.