Electrolux ESF 6162 Instruction Book - Page 7

Browse online or download pdf Instruction Book for Dishwasher Electrolux ESF 6162. Electrolux ESF 6162 20 pages.
Also for Electrolux ESF 6162: Instruction Book (20 pages)

Print Page

"3 in 1" function

This appliance is equipped with the "3 in 1" function, that

allows the use of the "3 in 1" combi detergent tablets.

This function can be selected with all washing programmes.

With the selection of this function the inflow of rinse aid and

salt from each respective supply container is automatically

deactivated and also the indicator lights for salt and rinse aid

are deactivated.

Select the "3 in 1" function before the set of a washing

programme.

Once selected this option (indicator light illuminated) it will

remain active also for the following washing programmes.

With the use of the "3 in 1" function, the cycle durations may

change. In this case, in the digital display, the indication of the

running time of the programme is automatically updated.

NOTE:

Once the programme is running, the "3 in 1" function

can NO longer be changed. If you want to exclude the "3 in 1"

function you have to cancel the programme setting (see

chapter "Starting a washing programme" - "Cancel a washing

programme in progress") and then deactivate the "3 in 1"

function.

In this case you have to set a washing programme (and

options) again.

Activation/deactivation of the "3 in 1" function

(The dishwasher must be switched off)

1. Press the On/Off button. The On/Off indicator light

illuminates (setting mode).

If a programme button indicator light is on, this means that

a washing programme is set. The programme must be

cancelled: press simultaneously function buttons 2 and 3

for about 2 seconds. All the indicator lights will turn off

(except for the On/Off indicator light and eventually salt

and rinse aid indicator lights) indicating that the set

programme has been cancelled and the machine is now in

setting mode.

2. Press simultaneously function buttons 2 and 3, until the

indicator lights of function buttons 1, 2, 3 and 4 start

flashing.

3. Press function button 4, the indicator lights of function

buttons 1, 2 and 3 turn off while the indicator light of function

button 4 goes on flashing.

4. Press function button 4 again, the "3 in 1" indicator light

illuminates, indicating that the "3 in 1" function is active.

To deactivate the function press function button 4 again, the

indicator light turns off.

3 in1 function active

3 in 1 function not active

5. To memorise the operation, switch off the dishwasher by

pressing the On/Off button or wait about 60 seconds after

which the dishwasher will automatically return to setting

mode.

indicator light on

indicator light off

NOTE:

if the drying results are not satisfactory we suggest

that you activate only the rinse aid dispenser.

The activation/deactivation of the rinse aid dispenser can only

be possible with the "3 in 1" function active.

Activation/deactivation of the rinse aid

dispenser

(The dishwasher must be switched off)

When the rinse aid dispenser has been activated, the rinse

aid indicator light on the control panel is automatically

activated.

1. Press the On/Off button. The On/Off indicator light

illuminates (setting mode).

If a programme button indicator light is on, this means that

a washing programme is set. The programme must be

cancelled: press simultaneously function buttons 2 and 3

for about 2 seconds. All the indicator lights will turn off

(except for the On/Off indicator light and eventually salt

and rinse aid indicator lights) indicating that the set

programme has been cancelled and the machine is now in

setting mode.

2. Press simultaneously function buttons 2 and 3, until the

indicator lights of function buttons 1, 2, 3 and 4 start

flashing.

3. Press function button 2, the indicator lights of function

buttons 1, 3 and 4 turn off while the indicator light of function

button 2 goes on flashing, the digital display

indicates the current setting.

Rinse aid dispenser deactivated

Rinse aid dispenser activated

4. To change the setting, press function button 2 again, the

digital display indicates the new setting.

5. To memorise the operation, switch off the dishwasher by

pressing the On/Off button or wait about 60 seconds after

which the dishwasher will automatically return to setting

mode.