Electrolux ESF 6720ROW User Manual - Page 10
Browse online or download pdf User Manual for Dishwasher Electrolux ESF 6720ROW. Electrolux ESF 6720ROW 20 pages. Electrolux911 417 023
Print Page10 www.electrolux.com
5. Adjust the water softener to the water
hardness in your area.
6. Adjust the released quantity of rinse
aid.
5.4 XtraPower
This option increases the water pressure
in the prewash and washing phases by
40%. The washing results are very good
also with heavy soiled loads.
How to activate the XtraPower option
1. Press Option until the XtraPower indi-
cator comes on. In the display you can
CAUTION!
Do not try to close the appliance
door while the device keeps the
door ajar. This can cause damage
to the appliance.
If you want to deactivate the AutoOpen
option, press AutoOpen. The related in-
dicator goes off.
In this condition, the energy consumption
of the programme increases.
5.6 Acoustic signals
The acoustic signals operate when the
appliance has a malfunction. It is not pos-
sible to deactivate these acoustic signals.
There is also an acoustic signal that oper-
ates when the programme is completed.
By default, this acoustic signal is off, but it
is possible to activate it.
How to activate the acoustic signal
for the end of programme
1. Press the on/off button to activate the
appliance.
see the update of the programme du-
ration.
• If the option is not applicable to the
programme, the related indicator
does not come on.
5.5 AutoOpen
This option gives good drying results with
less energy consumption.
This option is automatically activated
when you set the programme
The AutoOpen indicator comes on.
It is not possible to set this option with
other programmes.
• While the drying phase operates, a de-
vice opens the appliance door and
keeps it ajar.
• At the end of the programme, the de-
vice and the appliance door retract. The
appliance automatically deactivates.
2. Press Reset for a few seconds.
3. Press and hold, at the same time, De-
lay and AutoOpen until the indicators
,
flash.
4. Press Delay,
• The indicators
go off.
•
The indicator
flash.
• The display shows the current set-
ting.
Acoustic signal on
Acoustic signal off
5. Press Delay to change the setting.
6. Press the on/off button to deactivate
the appliance and to confirm the set-
ting.
.
and
start to
and
continues to