Electrolux ESF2300DW User Manual - Page 10
Browse online or download pdf User Manual for Dishwasher Electrolux ESF2300DW. Electrolux ESF2300DW 20 pages.
Print Page
10
www.electrolux.com
The water softener should be adjusted
according to the hardness of the water in
your area. Your local water authority can
advise you on the hardness of the water
in your area. Set the right level of the
water softener to assure good washing
results.
Water hardness
German
degrees
(°dH)
0 - 5
6 - 11
12 - 17
18 - 22
23 - 34
35 - 45
1) Factory setting.
Regardless of the type of detergent
used, set the proper water hardness
level to keep the salt refill indicator
active.
Multi-tabs containing salt are
not effective enough to
soften hard water.
6.4 Changing water softening
setting
1. Close the appliance door.
2. Press On / Off button.
3. Press and hold Start / Reset button
immediately for 6 seconds.
The programme indicators show the
current water softener level.
4. Press Start / Reset button to select
the water softening level.
The level is set after 6 seconds.
French de‐
mmol/l
grees (°fH)
0 - 9
0.0 - 0.9
10 - 19
1.0 - 2.0
20 - 30
2.1 - 3.0
31 - 39
3.1 - 4.0
40 - 60
4.1 - 6.1
61 - 80
6.2 - 8.0
Softening hard water
increases the consumption
of water and energy as well
as the programme duration.
The higher the level of water
softener, the higher the
consumption and the longer
the duration.
Clarke de‐
Setting on
grees
the water
softener
0 - 7
1
8 - 14
2
15 - 21
3
22 - 27
4
28 - 42
5
43 - 56
6
6.5 Filling the detergent
dispenser
CAUTION!
Use only detergents for
dishwashers.
1. Press the release button to open the
lid of the detergent dispenser.
A B
2. Put the detergent (approximately 15
g) in the compartment (C). Put
detergent tablets in part (E) of the
compartment.
Setting indi‐
cation
1)