Electrolux ESF2400OH User Manual - Page 15
Browse online or download pdf User Manual for Dishwasher Electrolux ESF2400OH. Electrolux ESF2400OH 20 pages.
Print Page
Problem
The required temperature is
not reached.
The display shows E3.
The anti-flood device is on and
an intermittent acoustic signal
sounds for approximately 30
seconds.
The display shows E4.
Technical malfunction of the
appliance.
The display shows Ed.
Once you have checked the appliance,
set and start the programme again. If the
problem occurs again, contact an
Authorised Service Centre.
9.2 The dishwashing and drying results are not satisfactory
Problem
The dishes are not clean.
Possible solution
• Contact an Authorised Service Centre.
• Close the water tap and contact an Authorised
Service Centre.
• Contact an Authorised Service Centre.
For alarm codes not described in the
table, contact an Authorised Service
Centre.
Possible cause
The selected programme
was not applicable for the
type of load and / or for the
degree of soil.
The basket was not loaded
correctly, water did not
reach all surfaces.
The spray arm could not
turn freely because of the
incorrect arrangement of
the load.
The filters are clogged.
The filters are not correctly
assembled and installed.
The quantity of detergent
was not enough or no de‐
tergent was used.
ENGLISH
Possible solution
Make sure that the pro‐
gramme is suitable to the
type of load and / or for the
degree of soil.
Load the basket correctly.
Make sure that the spray
arm can turn freely before
you start a programme.
Make sure that the filters
are clean.
Make sure that the filters
are correctly assembled
and installed.
Make sure that a correct
amount of detergent is
used.
15