CommPact wireless intruder control panel Quick User Manual - Page 3

Browse online or download pdf Quick User Manual for Control Panel CommPact wireless intruder control panel. CommPact wireless intruder control panel 4 pages.
Also for CommPact wireless intruder control panel: Quick User Manual (4 pages)

Print Page
Edit/Delete User Code
1.
From the main display press
2.
Enter master code (Default code
1234).
3.
Select [4] User Code and press
Omit a Zone
1.
From the main display press
2.
Enter master code (Default code
1234).
3.
On the main menu, press [21].
SMS Control Commands
Controlling the System through SMS
SMS Structure:
[Free text - Up to 43 characters][#][User Code][Command]
Example:
UNSET#1234120
Optional Free Text
U
N
S
E
T
Telephone Control Commands
1.
Dial the number of the premises
o
If your system is connected to a regular phone line dial the number of the panel
and wait for three rings then hang up. Wait at least five seconds and dial the
number again. On the second ring the control system answers and sounds two
tones.
o
If your system supports cellular communication dial and wait until the system
answers and two tones are heard.
2.
Within 15 seconds, enter the Telecontrol Code (code 29). After a tone sounds, press:
3: Full set
6: Unset
7: Extend the call
9: Cancel sounder
.
.
User Code
#
1
2
3
4
4.
Select a user and press
5.
Select [1] Edit Code.
6.
Edit the user code or enter 0000 to
delete.
.
7.
Press
4.
Select a zone and press
toggle.
5.
To save the status, press
Command Code Numbers:
120: Unset
121: Full set
122: Part set
123: Perimeter set
030: PGM off
Command
130: PGM on
1
2
0
200: System set status
2: 2 Way Audio
430: PGM on
530: PGM off
*#: Disconnect the line
3
.
.
to
.