Formech 686 Quick Start Manual - Page 6
Browse online or download pdf Quick Start Manual for Vacuum Forming Machines Formech 686. Formech 686 6 pages.
Print Page
Back
This operation will exit the main operation screen and return to the main menu screen.
Auto-level
This operation enables the beam sensor to provide automatic levelling of the sheet level
during heating. Compressed air is applied under the heated sheet when the beam is broken.
This button latches and may be unlatched at any time.
Auto-Vacuum
This function allows the vacuum to be triggered by a limit switch mounted on the cylinder.
When this feature is enabled the vacuum will be turned on automatically when the table is
driven up. The switch position is adjustable.
Settings
This button provides access to the settings screen where the operating parameters may be
adjusted.
Notes:
* You will fine-tune the amount of time after a few pulls. The timer keeps track of from when you
pulled the heater forward to when you pushed back.
** If there are any issues (webbing, thinning, mold not releasing, etc) with your mold refer to the
guide books in the machine manual to evaluate your issues.
Plastics Lab
V1.0 2/8/2018