Carmanah R820-G Install Manual - Page 6

Browse online or download pdf Install Manual for Radar Carmanah R820-G. Carmanah R820-G 14 pages. Cabinet-based systems
Also for Carmanah R820-G: Quick Start Manual (16 pages), Manual (11 pages), Energy Management System Replacement Manual (12 pages), Cabinet Door Replacement Manual (10 pages), Manual (9 pages), Manual (10 pages), Manual (10 pages), Manual (10 pages)

Print Page
Carmanah R820-G Install Manual

4.0 G Series Cabinet Installation

4.1

Antenna

1. Remove power to the system. For AC-powered systems, turn off the circuit breaker in the cabinet and for
solar-powered systems remove the battery and solar fuses.
2. Use the indentation in the center of the cabinet to locate the tip of the drill bit. Drill a ½" hole on top of the
enclosure. Deburr hole and remove all aluminum chips.
Ensure the equipment is not powered during installation. Recheck all wiring prior to energizing
the system.
Ensure all metal chips are removed to prevent system damage caused by short circuits.
Ensure that no burrs are present that would prevent the antenna from making a good seal with
the top of the cabinet.
Carmanah Technologies Corp. | 250 Bay St, Victoria, BC V9A 3K5, Canada | 1.250.380.0052 |
APPLIED INFORMATION (AI) INTEGRATION
INSTALL GUIDE
6
|
carmanah.com