ATI Audio DDA224-BNC Operating And Maintenance Manual - Page 6
Browse online or download pdf Operating And Maintenance Manual for Amplifier ATI Audio DDA224-BNC. ATI Audio DDA224-BNC 9 pages. Aes/ebu digital audio distribution amplifiers
Print Page
connecting them together with a short cable and noting that all red LEDs are off,
all green LEDs are on and the correct sample rate is steadily displayed.)
2. The factory default setting for the front panel equalizer control(s) is fully
counterclockwise. With a small screwdriver, slowly turn it clockwise, pausing after
each half turn for three seconds to allow the displays to update. Note the first
position at which all red LEDs are off, all green LEDs are on and the sample rate
is displayed steadily.
3. Continue to turn the control clockwise, counting turns, until the conditions of 2
above are no longer obtained.
4. Turn the control counterclockwise by half the number of turns counted in 3.
above. This is the optimum setting for the installed cable length and sample rate.
ATI Audio Inc.
■ Tel: 856-626-3480
■
Fax: 856-504-0220
■
www.
audio.com