Carmanah Legacy Series Energy Management System Replacement Manual - Page 9
Browse online or download pdf Energy Management System Replacement Manual for Lighting Equipment Carmanah Legacy Series. Carmanah Legacy Series 12 pages.
Print Page
4. Review the existing wiring and take an image as needed for future reference. The wiring layout for this
control board is provided in
5. Remove all wiring on the control board by lightly pushing down on wire release button with a small flat
head screwdriver and pull back on the wires. Remove the solar panel wires last and cap off temporarily
with wire nuts or insulation tape. If required, you can cover the solar panel while working on the system
for added protection.
Wire release
buttons
6. Remove the four mounting screws that are securing the EMS to the enclosure and set the EMS aside.
Older systems will have five mounting screws to remove.
Carmanah Technologies Corp. | 250 Bay St, Victoria, BC V9A 3K5, Canada | 1.250.380.0052 |
Section
2.
ENERGY MANAGEMENT SYSTEM
REPLACEMENT GUIDE
|
carmanah.com
9