Carmanah R920-F Energy Management System Replacement Manual - Page 5

Browse online or download pdf Energy Management System Replacement Manual for Lighting Equipment Carmanah R920-F. Carmanah R920-F 12 pages. Traffic beacon
Also for Carmanah R920-F: Quick Start Manual (20 pages)

Print Page
Carmanah R920-F Energy Management System Replacement Manual
ENERGY MANAGEMENT SYSTEM
REPLACEMENT GUIDE

2.0 Energy Management System (EMS) Overview

Relay Control/Monitoring:
EXT1 (also labelled as OUT1 on G Series wiring terminal block) – Used for Applied Information time switches
only. Pulses of voltage (relative to DC-) indicate the system is operating with no detected fault. This "heartbeat" is
used as part of Carmanah's StreetHub system monitoring through the Applied Information time switch.
EXT2 (also labelled as OUT2 on G Series wiring terminal block) – This terminal provides a steady +12 V
(nominal, relative to DC-) signal whenever the fixtures are activated and no faults are detected. This digital output
is commonly used for triggering a relay to power third party devices or overhead lighting while a fixture is active. It
is also used for certain push button applications.
5
Carmanah Technologies Corp. | 250 Bay St, Victoria, BC V9A 3K5, Canada | 1.250.380.0052 |
|
carmanah.com