Carmanah R247-G Manual - Page 6

Browse online or download pdf Manual for Security System Carmanah R247-G. Carmanah R247-G 9 pages. Wireless control
Also for Carmanah R247-G: Quick Start Manual (16 pages), Manual (11 pages), Energy Management System Replacement Manual (12 pages), Cabinet Door Replacement Manual (10 pages), Manual (10 pages), Install Manual (14 pages), Manual (10 pages), Manual (10 pages), User's Manual Supplement (12 pages)

Print Page

3.1

Removing Solar Components

Battery removal should not be carried out in windy conditions. In all cases, the area at the base of

the post must be roped off to prevent people from being injured or killed by falling batteries.

1. Access the inside of the battery cabinet and remove the solar and battery fuses on the right side to shut

down power to the system.

2. Remove the battery harness on the battery. Do not short the wires together during this process. Cut the

cable tie securing the battery harness then unscrew the harness from the DC Input Power terminals.

3. Remove the battery from the cabinet.

4. Cut the cable tie securing the solar panel harness then unscrew the harness from the DC Input Power

terminals. Cap off the wires with wire nuts so they don't get shorted together during disassembly.

5. Remove the solar panel, solar panel harness, and solar panel mount from the pole.

6. Remove the battery bumpers as shown pictured below:

Carmanah Technologies Corp. | 250 Bay St, Victoria, BC V9A 3K5, Canada | 1.250.380.0052 |

SOLAR TO AC RETROFIT GUIDE

carmanah.com