CommScope BSAMNT-3 Instruction Sheet - Page 3

Browse online or download pdf Instruction Sheet for Racks & Stands CommScope BSAMNT-3. CommScope BSAMNT-3 4 pages. For wide panel antennas

Print Page
MAXIMUM TORQUE
M10
40N.m (30ft.lbs)
M12
58N.m (43ft.lbs)
12
13
11
1
19
•
Loosen pivot screws . (do
not remove)
• Remove adjuster screws.
• Adjust antenna angle.
(use inclinometer)
• Reinstall adjuster screws.
• Retighten all screws.
www.commscope.com
© 2020 CommScope, Inc. All rights reserved.
Visit our website at www.commscope.com or contact your local CommScope representative or BusinessPartner for more information.
All trademarks identified by ® or ™ are registered trademarks or trademarks, respectively, of CommScope, Inc. 639840 J (02/20)
M10 screw
8
9
10
C
WARNING: LOOSENING OR REMOVING BOLTS
THAT ATTACH MOUNTING PLATE TO ANTENNA
WILL VOID WARRANTY AND MAY RESULT IN
PRODUCT DAMAGE OR PERSONAL INJURY.
Bottom Mount Installation
M10 pivot screw
(loosen only)
D
use inclinometer to
adjust antenna angle
M10 pivot screw
(loosen only)
Adjusting Antenna Tilt - 2 POINT MOUNT
(Not applicable for BSAMNT-F)
DETAIL C
M10 pivot screw
(loosen only)
M10 pivot screw
center location
(loosen only)
M10 pivot screw
(loosen only)
M8 adjuster screw
perimeter location
(remove to adjust tilt)
DETAIL D
MAXIMUM TORQUE
M8
25N.m (18ft.lbs)
M10
40N.m (30ft.lbs)
M12
58N.m (43ft.lbs)
639840
Page 3 of 4