Advanced Keys AK-101 Installation Manual - Page 11

Browse online or download pdf Installation Manual for Remote Starter Advanced Keys AK-101. Advanced Keys AK-101 12 pages. Intelligent keyless entry system

Print Page

Main Controller Wiring Diagram

1. Jumper Settings:

JP1: Door Switch

Positive

JP2: Central Lock Type

Vacuum

JP3: Unlock Pulse

Double

Pulses

JP4: Sound Output Type

Siren

2. Minimum Installation Without Alarm Function

For vehicles already equipped with factory/existing anti-theft alarm system, you may

install this system without the alarm function. Connect BATTERY, GROUND, LOCK,

UNLOCK, BRAKE, ACC and ATENNAS for smart keyless entry function only.

Ensure the ACC input is connected. It is needed to conserve the access key's battery

while vehicle is in ACC/ON state. Note: do not leave your access key in the vehicle for

extended periods of time when not operating (Control unit will continue to authenticate

with the access key unless vehicle is in ACC/ON state)

BRAKE input is optional however it is used for Ignition Lock functions (See User

Manual for more information).

Negative (Default)

Power (Default)

Single Pulse

(Default)

Horn (Default)

Note:

JP4: Sound Output Type is a dual function

jumper setting. The default setting is

OEM Horn. Under OEM Horn setting

there will be no sound when Passively

Locking/Unlocking. Only Turn Indicator

Lights flash as notification.

If need sound notification and/or using

siren as output, change the jumper

setting to siren. When Locking Passively,

horn/siren output will sound 1 time and

turn indicator light will flash 1 time.

When Unlocking Passively, horn/siren will

sound 2 times and turn indicator will

flash 2 times as well.

You may use both horn-siren together.

When wiring siren, please follow the

wiring diagram in the previous page and

make sure to use an extra relay.