Carmanah G Series Install Manual - Page 12

Browse online or download pdf Install Manual for Construction Equipment Carmanah G Series. Carmanah G Series 14 pages. Rrfb mast arm kit
Also for Carmanah G Series: Quick Start Manual (16 pages), Manual (11 pages), Energy Management System Replacement Manual (12 pages), Cabinet Door Replacement Manual (10 pages), Manual (9 pages), User Manual (18 pages), Manual (10 pages), Manual (10 pages), Install Manual (18 pages)

Print Page

4.4

Testing AI FCU

1. Ensure AI serial number has been activated.

2. For SC315-G or R820 systems set toggle switch to "OFF". In all other cases set to "AUTO".

3. Ensure connector is properly mated on the bottom of the AI FCU.

4. Confirm correct wiring and power-up system by connecting the DC power (system fuses or switching on

breaker) and turning on the AI power switch.

5. On your PC, open a browser and navigate to the Glance website:

glance.appinfoinc.com

6. Log in using the credentials provided by AI or the distributor you purchased the equipment from.

7. On the upper left side of the browser, select the device name that matches the Device ID (the ID number

labelled on the AI FCU).

Ensure the equipment is not powering during installation. Recheck all wiring prior to energizing

the system.

Carmanah Technologies Corp. | 250 Bay St, Victoria, BC V9A 3K5, Canada | 1.250.380.0052 |

APPLIED INFORMATION (AI) INTEGRATION

INSTALL GUIDE

carmanah.com