ATI Technologies ADA206XLR Operating And Maintenance Manual - Page 5

Browse online or download pdf Operating And Maintenance Manual for Amplifier ATI Technologies ADA206XLR. ATI Technologies ADA206XLR 9 pages.

Print Page

PRODUCT SPECIFICATIONS

OUTPUT LEVEL: +22dBm peak into 600 ohm balanced load, +18dBm peak, typical, into

unbalanced loads

DISTORTION: THD .10% maximum, 20 to 20,000Hz at peak output, IMD .05% maximum,

SMPTE measurement

SLEW RATE: 13 Volts per microsecond

RESPONSE: ± .25dB, 20 to 20,000Hz

NOISE: -95dBm out at maximum gain, 20kHz bandwidth

GAIN: 40dB maximum

CROSSTALK: 70dB minimum at 10kHz, any path

OUTPUT ISOLATION: 70 dB minimum at 1kHz. A shorted output does not affect any

other output.

OUTPUTS: Active balanced, servo controlled, ground sensing, 50 Ohm output impedance,

DC coupled. XLR type male connectors, Pin 2-HI, 3-LO, 1-GND.

INPUTS: 20Kohm active balanced, split and RF bypassed. +22dBm maximum input level,

60dB CMR at 60Hz. XLR type female connectors, Pin 2-HI, 3-LO, 1-GND.

POWER: 85-264 VAC ±1%, Output Voltage 24 VDC, Ouput Power 15 W, 47 - 63Hz

frequency range.

SIZE: 19" (48.3cm) W X 1.75" (4.45cm) H X 7.5" (19cm) D

www.atiaudio.com

7209 Browing Road

DaySequerra

Pennsauken, NJ 08109