ATI Technologies DDA112-BNC Operating And Maintenance Manual - Page 7
Browse online or download pdf Operating And Maintenance Manual for Amplifier ATI Technologies DDA112-BNC. ATI Technologies DDA112-BNC 8 pages. Aes/ebu digital audio distribution amplifiers
Print Page
SPECIFICATIONS
INPUTS
Connectors:
Level:
Impedance:
Cable Length:
Equalizer:
Sample Rates:
DDA Clock:
DSA Clock:
OUTPUTS
Connectors:
Levels:
Impedances:
BNC:
Output Jitter:
Output Delay:
Audio Technologies Inc.
XLR female or BNC, DC isolated from chassis.
Input connector pairs paralleled for loop-thru.
200mVp-p minimum
Transformer isolated, capacitor coupled, balanced and
floating, XLR inputs 110 ohms, and BNC and RCA inputs 75
ohms.
Terminating resistors may be switched in or out on rear
panel.
300m of 110-ohm cable, 1000 m of 75 ohm coax (with
equalizer)
Multi-turn panel control, adjust using DSA panel indicators
Accepts 27kHz to >100kHz
Regenerated from input signal with dual-mode PLL Clock
Jitter <3nanoseconds peak-to-peak at 96kHz sample rate
Non-regenerated. Input clock is passed directly to outputs.
XLR male, 6 or 12; BNC chassis mount, 12 or 24
XLR, 4Vp-p loaded at 110 ohms. BNC, 2Vp-p loaded at 75
ohms, RCA, 0.5Vp-p loaded at 75 ohms
XLR: 110 ohms, balanced, transformer isolated and
capacitor coupled
75 ohms, unbalanced, capacitor coupled
<3 nanoseconds peak to peak at 96kHz sample rate
Three frames (sample intervals) at the sample rate
• Tel: 856-626-3480
•
Fax: 856-504-0220
•
www.
audio.com