ATI Technologies DSA Series Operating And Maintenance Manual - Page 2

Browse online or download pdf Operating And Maintenance Manual for Amplifier ATI Technologies DSA Series. ATI Technologies DSA Series 8 pages. Aes/ebu digital audio distribution amplifiers

ATI Technologies DSA Series Operating And Maintenance Manual
 
DESCRIPTION
 
The DDA Series of Digital Audio Distribution Amplifiers are designed to
regenerate, isolate and distribute digital audio data formatted in accordance with
specifications AES3-1992 and IEC 958. This is commonly called AES/EBU
formatting.
 
The DSA Series operates much the same as the DDA Series; however, the DSA
Series does not include the full featured display front panel and does not provide
re-clocking of the digital input signal. The non-reclocking feature is essential
when distributing Dolby E encoded AES signals and other clocked signals that
should not be re-clocked.
 
DDAxxx-XLR and DSAxxx-XLR models use XLR connectors and operate from
and drive a 110-ohm balanced shielded twisted pair distribution system per
AES3-1992.
 
DDAxxx-BNC and DSAxxx-BNC models use BNC connectors and operate from
and drive single-ended 75-ohm coaxial cable per AES-3id-1995 and are
designed to integrate easily into video facilities.
 
S/PDIF (consumer) formatted digital audio data differs primarily in the use of
consumer type "RCA" audio connectors in an unbalanced 75 ohm system and
can be handled by a DDAxxx-BNC with use of an RCA to BNC input cable.
 
S/PDIF digital audio can be connected directly to a DSA106-RCA unit.
 
 
FEATURES
 
• Accepts sample rates from 27 to 96kHz
• Displays standard sample rates of 32, 44.1, 48, 88.2, 96 kHz (DDA only)
• Status and error LEDs show clock lock and data validity (DDA only)
• Adjustable input equalizers compensate for very long cable runs (DDA only)
• Data is relocked and regenerated before low-jitter transmission (DDA only)
• Loop thru transformer balanced and isolated inputs
• Switchable input termination resistors
• Individual, transformer balanced and isolated 110 ohm XLR outputs (-XLR only)
• Individual isolated 75-ohm BNC outputs (-BNC only)
• Single or dual inputs
• Up to 12 XLR or 24 BNC outputs
• Quiet, internal linear power supplies
• Attractive, 1RU package
 
Audio Technologies Inc.
• Tel: 856-719-9900 • [email protected]
www.
audio.com