Dreaming Robots Electric Eel Wheel 6.0 User Manual - Page 5

Browse online or download pdf User Manual for Robotics Dreaming Robots Electric Eel Wheel 6.0. Dreaming Robots Electric Eel Wheel 6.0 12 pages.

Print Page
Dreaming Robots Electric Eel Wheel 6.0 User Manual

Starting Procedure

1) If you want to use the foot switch, insert its plug into the back
of the base, in the port marked "switch."
2) Turn the speed dial on the side all the way
counterclockwise to make sure the speed
starts at zero (as shown in the picture to the
right).
3) Plug the power supply into the wall. You will
see a little power light on the power supply
light up. If you're using a battery pack, turn it on now.
4) Plug the power supply or battery pack into the back of the EEW.
A green light on the back of the EEW will blink three times to
indicate that the EEW has power.
5) Slowly turn the speed dial clockwise to increase the speed of
the flyer.
6) Press the foot pedal to start and stop spinning. The twist switch
can also stop/start the wheel. The twist switch only reverses
direction after you set the speed to zero.
4