Anden A130 Installation And Operating Instructions Manual - Page 4
Browse online or download pdf Installation And Operating Instructions Manual for Dehumidifier Anden A130. Anden A130 12 pages.
Print Page
CONTROL LOCATION
For floor mount installation, leave the control
mounted to the top of the unit. For suspended
installations, it will be easier to see if the control is
relocated to the front of the unit.
To move the control:
1. Remove the front control panel cover.
2. Remove the filter access door and filter.
3. Detach the on-board control by removing the four
(4) screws around the control. NOTE: Use one hand
to support the bottom of the on-board control
when removing.
4. Keep the control in the unit and relocate to the front
access hole.
5. Secure the control with the same four screws used
to attach the control to the top of the unit.
6. Secure the control panel cover to the top of the unit.
LOCATION CONSIDERATIONS
• Allow sufficient clearance for filter removal and to
prevent airflow obstruction
• Electrical service access will require the removal
of the side panel shown. Allow sufficient space for
service on this side of the unit.
• When suspending the unit, a condensate pan
with float switch is recommended to prevent any
leaks that may occur due to unforeseen drain line
obstructions.
4
FIGURE 5 – CONTROL LOCATION
CONTROL
CONTROL
PANEL COVER
FIGURE 6 – FILTER ACCESS CLEARANCE
ELECTRICAL SERVICE ACCESS THIS SIDE
6 FT. POWER CORD
TOP VIEW
CONTROL
PANEL COVER
CONTROL
FILTER ACCESS DOOR
20"
MINIMUM
FILTER
CLEARANCE
FOR FILTER
(EITHER SIDE)
90-2017
6" MINIMUM
CLEARANCE
FOR PROPER
AIR FLOW
90-2020