ATI Technologies 39-0214 Quick Start Manual - Page 2

Browse online or download pdf Quick Start Manual for Industrial Equipment ATI Technologies 39-0214. ATI Technologies 39-0214 4 pages.

Print Page

INDEX

Good Practice

The ATL HDX Reader:

ATL HDX Reader Synchronisation Connections:

GOOD PRACTICE:

INDEX

Cables must be kept as short as possible running directly from point to point. Cut out any

excess cable rather than leaving it coiled.

Where ever possible cables should be contained in a waterproof conduit using

csa cable specified in the diagrams.

Entries must be made into the bottom of power supply or control casings but never into the

top. This will invalidate the warranty.

Strip existing cables back to bright copper before connection.

Keep multicore cables away from other cables especially those carrying mains or heavy

currents. Cross only at 90 where necessary and do not enclose in conduit with other cables.

Keep feeder cables and coaxial cables in separate conduits.

Make sure diodes are fitted to all feeders, pulsators and solenoid valve. These should be

fitted as close as possible to feeder motor or solenoid coil.

ATL HDX READER

SYNC: INDEX

Control, Power and Data Cables and Conduit.

the correct