ATI Technologies 39-0220 Operating - Page 4
Browse online or download pdf Operating for Industrial Equipment ATI Technologies 39-0220. ATI Technologies 39-0220 15 pages.
Enabling Auto-ID: Subroutine 300:
The scanning and ear tag reading system may be switched on and off through this subroutine.
Run Subroutine 300. The display will show 'AId' (AUTO-ID) and the current status-
'YES' or 'no' (enabled/disabled) will appear in the Yield/Flags window.
Toggle between the two states by using the Change key
Press Enter to store the selection.
Turn Ration Pre-feed On and Off: Subroutine 304:
The Auto-ID system will allow a small portion of feed to be delivered to each cow as soon as
they arrive at a stall. This can help to calm nervous cows during the first few days of using the
system. All of the cows are fed including those that do not have a ration. The portion of cake that
is delivered is subtracted from the cow's actual ration.
Run Subroutine 304. The current status (YES=on/no=off) will be shown in the Yield/Flags
window with the code 'Pre' (Pre-feed) in the Cow Number window.
Turn Pre-feed on or off using the Change key to toggle.
Press Enter to store the selection.
NB - Pre-feed can be turned on for either the left or right-hand side using subroutines 302 and
303 overleaf.
!
During testing, turn Pre-feed OFF.
Cow
Program
Cow
Program
HERRINGBONE
AUTO-ID
OPERATION: 2A
DELETE
Change
Ration
Yield/Flags
SUBS
Enter
DELETE
Change
Ration
Yield/Flags
SUBS
Enter
Stall/Side
Stall/Side