Bosch Professional GSR 14,4 V-LI Original Instructions Manual - Page 5
Browse online or download pdf Original Instructions Manual for Power Tool Bosch Professional GSR 14,4 V-LI. Bosch Professional GSR 14,4 V-LI 38 pages. 14,4 v-li | 18 v-li professional
Also for Bosch Professional GSR 14,4 V-LI: Original Instructions Manual (7 pages), Original Instructions Manual (9 pages), Original Instructions Manual (43 pages)
Print Page
OBJ_BUCH-1277-003.book Page 5 Thursday, July 14, 2016 2:54 PM
In case of excessive loading, e. g., prolonged blocking
of the application tool, the electronics switch off the
power tool. After switching on again, the power tool
can be used again as intended for. In case of continued
overload, the power tool will switch off again in order
to prevent damage to the motor.
Symbols
The following symbols are important for reading and under-
standing the operating instructions. Please take note of the
symbols and their meaning. The correct interpretation of the
symbols will help you to use the machine in a better and safer
manner.
Symbol
Meaning
GSR 14,4 V-LI/GSR 18 V-LI/
GSB 14,4 V-LI/GSB 18 V-LI:
Cordless screwdriver/Combination
cordless drill
Grey-marked area: Handle (insulated
gripping surface)
Article number
Read all safety warnings and all instruc-
tions
Before any work on the machine itself,
remove the battery
Always wear ear protection.
Movement direction
Reaction direction
Drilling and screwdriving
Impact drilling
Low speed
High speed
Bosch Power Tools
Symbol
Meaning
Switching On
Switching Off
Right/left rotation
U
Rated voltage
n
Impact rate
S
n
1
No-load speed (1. gear)
0
n
2
No-load speed (2. gear)
0
M
Maximum torque according to ISO 5393
Brickwork
Metal
Wood
Ø
Drilling diameter, max.
Ø
Max. screw dia.
Chuck clamping range
Weight according to EPTA-Procedure
01:2014
*
dependent of the battery pack being
used
Delivery Scope
Cordless screwdriver/Combination cordless drill.
Battery, application tools and other accessories shown or de-
scribed are not part of the standard delivery scope.
A complete overview of accessories can be found in our ac-
cessories program.
Intended Use
The machine is intended for driving in and loosening screws
as well as for drilling in wood, metal, ceramics and plastic.
GSB machines are additionally intended for impact drilling in
bricks, brickwork and masonry.
Technical Data
The technical data of the machine are listed in the table on
page 33.
Please observe the article number on the type plate of your
machine. The trade names of the individual machines may
vary.
English | 5
1 609 92A 1TE | (14.7.16)