Electrolux 1 Service Manual - Page 10

Browse online or download pdf Service Manual for Freezer Electrolux 1. Electrolux 1 32 pages. Chest freezer
Also for Electrolux 1: User Manual (24 pages), User Manual (28 pages)

Print Page

C.5

Safety signs to be placed on the

machine or near its area

Prohibition

Meaning

do not oil, lubricate, repair and adjust

moving parts

do not remove the safety devices

do not use water to extinguish fires

(placed on electrical parts)

Danger

Meaning

caution, hot surface

danger of electrocution (shown on elec-

trical parts with indication of voltage)

C.6

Instructions for use and maintenance

Risks mainly of a mechanical, thermal and electrical nature

exist in the machine. Where possible the risks have been

neutralised:

• directly, by means of adequate design solutions.

• indirectly by using guards, protection and safety devices.

Any anomalous situations are signalled on the control panel

display.

During maintenance several risks remain, as these could not

be eliminated, and must be neutralised by adopting specific

measures and precautions.

Do not carry out any checking, cleaning, repair or maintenance

operations on moving parts. Workers must be informed of this

prohibition by means of clearly visible signs.

To guarantee machine efficiency and correct operation,

periodical maintenance must be carried out according to the

instructions given in this manual.

Make sure to periodically check correct operation of all the

safety devices and the insulation of electrical cables, which

must be replaced if damaged.

C.7

Reasonably foreseeable improper use

Improper use is any use different from that specified in this

manual. During machine operation, other types of work or

activities deemed improper and that in general can involve

risks for the safety of operators and damage to the appliance

are not allowed. Reasonably foreseeable improper use

includes:

• lack of machine maintenance, cleaning and periodical

checks;

• structural changes or modifications to the operating logic;

• tampering with the guards or safety devices;

• failure to use personal protection equipment by operators,

specialised personnel and maintenance personnel;

• failure to use suitable accessories (e. g. use of unsuitable

equipment or ladders);

• keeping combustible or flammable materials, or in any case

materials not compatible with or pertinent to the work, near

the machine;

• wrong machine installation;

• placing in the machine any objects or things not compatible

with its use, or that can damage the machine, cause injury

or pollute the environment;

• climbing on the machine;

• non-compliance with the requirements for correct machine

use;

• other actions that give rise to risks not eliminable by the

Manufacturer.

WARNING

The previously described actions

are prohibited!

C.8

End of use

When the appliance is no longer to be used, make it unusable

by removing the mains power supply wiring.

C.9

Residual risks

The machine has several risks that were not completely

eliminated from a design standpoint or with the installation of

adequate protection devices. Nevertheless, through this

manual the Manufacturer has taken steps to inform operators

of such risks, carefully indicating the personal protection

equipment to be used by them. In order to reduce the risks,

provide for sufficient spaces while installing the unit. To

preserve these conditions, the areas around the machine

must always be:

• kept free of obstacles (e.g. ladders, tools, containers, boxes,

etc.);

• clean and dry;

• well lit.

For the Customer's complete information, the residual risks

remaining on the machine are indicated below: such situations

are deemed improper and therefore strictly forbidden.

Residual risk

Description of hazardous

situation

Slipping or falling

The operator can slip due to water

or dirt on the floor

Burns/abrasions (e.g.

The operator deliberately or unin-

heating elements,

tentionally touches some

components inside the machine

cold pan, cooling cir-

cuit plates and pipes)

without using protective gloves.

Stab wounds

The operator deliberately or unin-

tentionally touches some

components with sharp edges

during the machine cleaning with-

out using protective gloves.

Burns

The operator deliberately or unin-

tentionally touches some

components inside the machine or

dishes at the outfeed without using

gloves or without allowing them to

cool.

Shearing of upper

The operator violently closes the

limbs

front panels.

Electrocution

Contact with live parts during

maintenance operations carried

out with the electrical panel

powered