Electrolux 10 GN2/1 Installation Manual - Page 13
Browse online or download pdf Installation Manual for Freezer Electrolux 10 GN2/1. Electrolux 10 GN2/1 34 pages. Electrical combi oven, touch and digital
Also for Electrolux 10 GN2/1: Manual (3 pages)
Print Page
• Do not remove, tamper with or make illegible the CE marking, the safety, danger and
instruction signs and labels on the appliance.
• The A-weighted emission sound pressure level does not exceed 70 dB(A).
• Do not use products (even if diluted) containing chlorine (sodium hypochlorite,
hydrochloric or muriatic acid, etc.) to clean the appliance or the floor under it.
• Carefully avoid exposure of the equipment to ozone - do not use ozonizers in the rooms
where the equipment is installed.
• Do not spray aerosols in the vicinity of this appliance while it is in operation.
• Do not place flammable liquids (e.g. spirits) inside the oven during operation.
• Install the appliance under conditions of adequate ventilation in order to provide a
suitable air change per hour. Make sure that the ventilation system, whatever it is,
always remains operational and efficient for the entire period of time during which the
equipment is operating.
The appliance must be installed under ventilation hood only.
• Improper ventilation of the oven can be hazardous to the health of the operator; and will
result in operational problems, unsatisfactory cooking results, and possible damage to
the equipment. Damage sustained as a direct result of improper ventilation OF THE
OVEN will not be covered by the Manufacturer's warranty.
• The following operations have to be carried out by specialised authorised personnel or
Customer Care Service provided with all the appropriate personal protection equipment
(A.2 Personal protection equipment), tools, utensils and ancillary means, who can ask
the manufacturer to supply a servicing manual:
– Installation and assembly
– Positioning
– Electrical connection
– Appliance cleaning, repair and extraordinary maintenance
– Appliance disposal
– Work on electrical equipment
A.4
Safety signs to be placed on the appliance or near its area
Prohibition
Disconnect the appliance from the power
ON
supply before carrying out any installation,
OFF
assembly, cleaning or maintenance
procedure.
Meaning
do not remove the safety devices
do not use water to extinguish fires (placed on electrical
parts)
Keep the area around the appliance clear and free from
combustible materials. Do not keep flammable materials in
the vicinity of the appliance
13