Advanced Kiosks Outdoor Monolith Owner's Manual - Page 10

Browse online or download pdf Owner's Manual for Digital Signage Advanced Kiosks Outdoor Monolith. Advanced Kiosks Outdoor Monolith 20 pages.

Print Page

Power and Ethernet for the Kiosk

8 Mounting

Holes

Three Rectangular Holes for Cables, and Mounting Holes

The Monolith Kiosk has been shipped with all power connections and plugs attached within the

power box, so that the kiosk can be tested and configured BEFORE permanently installing.

Power leaving the conduit can be secured in the junction box located in the bottom section of the

kiosk. This is a sealed box for protection and should be done by a professional electrician.

A certified electrician needs to be used if the power supply box is going to be hard wired into a

power source.

The cable should be concealed using appropriate conduit or similar material from the power box

to the kiosk so no one can trip or tamper with the cord. The power and ethernet will go through

one of the 3 holes in the bottom of the enclosure.

The power cable (as well as Ethernet cable) needs to be run up from the bottom of the kiosk, so

no wires are exposed. Connect the end of the cable into the plug on the bottom section of the

kiosk.

12/16/2020

Outdoor Monolith Kiosk Assembly and Operation Instructions