Communications Specialties Scan Do 1024 User Manual - Page 13
Browse online or download pdf User Manual for Media Converter Communications Specialties Scan Do 1024. Communications Specialties Scan Do 1024 16 pages. Computer to video scan converter
IF YOU ARE EXPERIENCING
Nothing works or
no video output
No video on outputs
(Just a blue screen)
Some of the image is being
lost off the sides, top, or
bottom
The color on the TV monitor
is different than the color
on the computer monitor
TROUBLESHOOTING
THEN CHECK TO SEE IF:
• The green POWER indicator is lit. Is the power supply
connected and plugged into the AC wall outlet?
• The computer is properly sending out a VGA or MAC
signal. Plug the VGA or MAC monitor into the
computer's output to check.
• The VCR or video monitor is in the proper mode to accept
direct video input.
• The green INPUT indicator is lit. If not, the computer
may not be in the proper VGA or MAC mode (see
page 6) or not producing a VGA or MAC signal at
all.
• Press the TEST button to see if you get color bars or
grey scale on the COMPOSITE or S-VIDEO
outputs.
• When using a laptop, try turning off the laptop's LCD
screen and having the VGA signal output through
the external port only.
• This is normal if the UNDERSCAN button is off. Press the
UNDERSCAN button and use the positioning buttons
to move the image on the screen.
• Since the picture tube on your computer monitor is different
than the one on your TV or video monitor, color
differences will be common. Adjust the COLOR,
TINT, CONTRAST, and BRIGHTNESS controls on
your TV to help match the colors to the computer
monitor. The test patterns built into Scan Do 1024
can be used to help you.
Scan Do 1024 User's Manual
Page 13